Used Ventilator Parts PHiliphhilip Respironics V200 Ventilator VAG Display Parts

► Brief Introduction

The Respironics V200 ventilators are microprocessor-controlled, electrically powered mechanical ventilators. They are intended for use by qualified medical personnel to provide continuous or intermittent ventilatory support for adult, pediatric, and neonatal patients as prescribed by a PHiliphhilipysician. They are intended for use in either invasive or non-invasive applications in institutional environments.

The front panel display allows you to select ventilation modes, breath types, settings, alarms, and access patient data. The front panel display is a touch screen that lets you select settings and data so you can monitor the status of the patient, ventilator, and control ventilator operation.

There are two different categories of screens:

• Ventilator Screens that appear when the machine is functioning as a ventilator
• Diagnostic Screens that appear when the machine is not functioning as a ventilator and is running internal tests

► Front Panel Level Controls

The front panel level controls enable you to adjust ventilator settings, brightness.

Display Brightness : Increases or decreases the brightness of the touch screen display

►Removal/Installation

Follow these steps to remove the VGA display assembly. Reverse removal steps to install.

1. Remove the top enclosure.

2. Remove the sensor PCB.

3. Remove the power supply.

4. Remove the GUI assembly.

5. Remove four hex screws holding the VGA display assembly to the spacers, then remove the display.

► Performance Verification​

► Cleanning & Sterilization

When cleaning parts, avoid the use of hard brushes or other instruments likely to cause surface damage.

Wipe the ventilator exterior clean with a damp cloth and mild detergent. Do not use liquid or aerosol bactericide. Do not allow moisture to come in contact with the touch panel screen or to collect between the keypad and front bezel assembly.

Care should be taken when cleaning the touch display. A soft moist cloth should be used that does not drip water and/or soap solution when in contact with the display. After cleaning and rinsing with a damp cloth, remove all moisture with a dry, soft cloth. Never allow solutions of any kind to collect on the bottom bezel of the display. Never use a brush or device that can cause abrasion to clean the touch display or its bezel; they will cause irreparable damage.

FAQ

1.Are your accessories compatible with products from other brands?

Most of our accessories are compatible with mainstream brands in the market; we can provide compatibility test reports upon request.

2.Can you design accessories compatible with specific brand products?

Yes, we can design and produce accessories compatible with specific brand products according to your requirements.

3.How to confirm the compatibility of an accessory with my equipment?

You can provide the model of your equipment, and our technical team will confirm the compatibility and provide a compatibility test report.

4.What if the accessory is not compatible with my equipment after purchase?

If the accessory is not compatible due to our mistake, we will arrange for replacement or refund free of charge.

5.Do you provide compatibility updates for new equipment models?

Yes, we will update the compatibility of our accessories in a timely manner when new equipment models are launched.

Please kindly contact us, if you are interested in Used Ventilator Parts PHiliphhilip Respironics V200 Ventilator VAG Display Parts , Thank you!

90 Day Warranty                             SGS ceryification