GE MAC 2000 Resting ECG EKG Analysis System For Repair In Hospital
GE MAC 2000 ECG Analysis System For Repair
MAC 2000 ECG Analysis System
The MAC 2000 ECG Analysis System is a portable ECG acquisition, analysis and recording system designed for use by a trained operator in a hospital or medical professional's facility setting, as well as in a clinic, PHiliphhilipysician's office, outreach center or any ECG for testing.
The MAC™ 2000 Electrocardiogram Analysis System is a portable device designed to acquire, analyze, display and record information on adult and pediatric populations in hospitals, medical Professional facilities, clinics, doctor's offices or outreach centers.
notes:
The pediatric population was defined as patients between the ages of 0 and 15 years.
The MAC™2000 ECG Analysis System offers the following modes of operation:
• Resting ECG mode
This mode is the default mode for your system.
• Arrhythmia patterns
This mode is intended to facilitate the automatic creation of documentation.
You can upgrade the basic system with two additional operating modes:
• Exercise mode for exercise stress test (optional)
This mode is used to test PHiliphhilipysical exertion.
• RR analysis mode for RR interval analysis (optional)
This mode is used for RR interval analysis
The basic system prints 6 or 12 EKG derivatives and optionally offers the transmission and reception of EKG data to a central cardiovascular EKG information system. You can also upgrade with software options such as 12-lead ECG measurement and interpretation analysis.
Contraindications
This system is not suitable for use in the following ways:
• During patient transport
• Equipped with high frequency surgical equipment
• As intracardiac application
• As a vital signs PHiliphhilipysiological monitor
| ECG Interpretation | Marquette* 12SL ECG Analysis Program for Adults and Pediatrics |
| Computerized measurements | 12-lead analysis |
| ECG analysis frequency | 500 or 1000 samples/second/channel |
| Digital sampling rate | 16000 samples/second/channel for normal data acquisition |
| Pace sampling rate | 75K samples/second/channel |
| ECG on-screen preview | On-screen preview of acquired 10 second ECG waveform |
| Acquisition mode | Provides 10 seconds of instantaneous ECG acquisition |
| Dynamic range | AC Differential ±5 mV, DC offset ±300 mV |
| Resolution | 4.88 µV +/-1% per LSB @ 500 SPS |
| Frequency range | 0.04 to 150 Hz |
| Low cut off frequency | 0.04 Hz (ADS off), 0.56 Hz (ADS On) |
| High cut off frequency | Configurable at 20 Hz, 40 Hz, 100 Hz or 150 Hz |
| Common mode rejection | >135 dB (with 50/60 Hz filter ON) |
| Input impedance | >10MΩ @ 10 Hz |
| Lead detection | All disconnected lead detection except RL & RA |
| Heart rate meter | 30 to 300 BPM |
| Operating system | Microsoft® Windows® CE 6.0 |
| Start-up time | Less than 30 seconds |
| Display type | 7 in. color TFT display with support of minimum 32K colors |
| Display resolution | WVGA resolution – 800 x 480 |
| Display data | Heart rate, patient ID, clock, battery power indicator, waveforms, lead lables, speed, gain and filter settings, warning messages, prompts, help messages, and 12-lead display |
| ECG Cables/Leadwires |
• IEC/AHA Value 10LD Patient Cable/Leadwire • 10-lead IEC/AHA Patient trunk cable • 14-lead IEC/AHA Patient trunk cable • IEC/AHA (Nst, Nax) Leadwire set (ECG 10-L w/resist, Banana) • IEC/AHA Set of leadwires (4mm connector, 10 leads, defibrillator proof) |
| ECG Adapter |
IEC/AHA Kit Adapter, 10 set Banana Electrode Prep Pads, CLIP Universal GE 10/Pkg |
| Electrodes |
• ECG Electrode Clamp (Large, 4/set) • Baby MAC electrodes • Silver Mactrode Plus 1000/CASE • Electrode Application System KISS 10-lead without pump • Electrode Application System KISS 12-lead without pump |
| Height | 200 mm |
| Width | 390mm |
| Depth | 330mm |
| Weight | Approx. 5 Kg including battery, without paper |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
