10 Heating Zones Lead Free Reflow Oven SMT Assembly Line Machine
10 Heating Zones Lead Free Reflow Oven SMT Assembly Line Machine
SMT Assembly Line Machine 10 Heating Zones Lead Free Reflow Oven
Features
Simple: combined with advanced international concepts, based on theOriental-designed operating system, easy to understand, easy to learn,easy to maintain.
Expertise: learn imported reflow oven's advanced design concepts, and themachine core components are using imported top brands.
Hedging: Import hardware configuration,low failure rate in production,morethan a decade service life.
Safety: Based on the general rules of international design, close to importedreflow rating, the highest security level.
Stable: mature software, hardware and top production processes ensuresstability of each equipment.
Parameter Table
| Modle | RF-H1010I |
| Control | PLC + PC |
| Temp Accuracy | ± 1C |
| Weight (kg) | Approx.2500 |
| Parts Height | On Baoard 35mm / Under Board 20mm |
| Machine Dimension (mm) | 5850*1490*1510 |
| Heating Zone Length (mm) | 3632 |
| Mesh Belt Width ( mm ) | 460 ( or Customized ) |
| Conveyor Type | Chain and Mesh Belt |
| Power Supply | 3P/AC 380V OR 3P/AC 220V |
| Cooling Type | Forced-air Coooling |
| Cooling Zone length ( mm ) | 600 |
| Temp Deviation | ± 2C |
| Conveyor Speed (mm/min ) | 20-1500 |
| Running / Starting Power (kw) | 11 / 37 |
| Temp Range | Room Temperature ~ 320C |
| PCB Width (mm) | 50 - 400 ( or customized ) |
Control System
Conveyor Rail
FAQ
1. What is standard temperature setting for wave solder machine?
Leaded soldering: Preheating1: 100℃ / Preheating2: 110℃ / Preheating3: 120℃ / Solder pot: 245℃
Lead-free soldering: Preheating1: 100℃ / Preheating2: 110℃ / Preheating3: 120℃ / Solder pot: 265℃
2. How are can make maintenance for wave solder machine?
Everyday: Cleaning the sundries in the pre-heating zone and solder pot, and check deviation between setting temperature and the real-time temperature (once every hour) ; Inspect tin surface altitude, at circumstance do not turn on the wave crest, the normal tin’s height should be kept 3-5 mms apart from the solder-pool;
Every week: Periodically cleaning of heating parts, clean out the oxide in the spray nozzle;
Every three months: Check electric circuit and electric wire
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.