HMI PLC All In One High Processing Speed 32bit CPU 408MHz RS485 COM Ports

Each PLC has optional COM port: 1 RS485 or 2 RS485 COM ports(one is changed from the default RS232 port), and 1 WIFI( occupy default RS232 port)

Specification:

Model: QM3G-43FH-24MR-2AD1DA-PT-A4-485P

HMI : 4.3 inch 480x272 pixels

PLC: 12 digital input

12 digital output

Analog optional

HMI PLC All In One Combo Device

Paramaters of HMI Part:

size of HMI: 4.3"TFT

RAM:64MB(HMI when stores historical data, optional ferroelectric is required)

ROM:NOR Flash 8MB

CPU:32bit CPU 408MHz

Software: Coolmay mView HMI Programming Software

Paramters of PLC Part:

Digital I/O: Max 12DI/12DO

I/O level: Input: Passive NPN, public terminal isolated

Transistor output: Low level NPN, COM connect to negative; Relay output: Normally open dry contact

DO type and load: Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point COM; MR: 2A/point, 5A/12 point COM.

Software: Compatible with GX Developer8.86 and GX WORKS2

Default programming port: 1 TYPE-C, 1 RS23 

Features:

1. Customized HMI PLC all-in-one is the first choice for small and medium-sized automation, with multifunctional, stable performance, convenient maintenance, safe and reliable.
2. Max support 6 analog inputs(7'')and 2 analog outputs, 12 bit precision. Analogs can be directly read by registers and for data output.
3. Support multi-channel high-speed counting and high-speed pulse functions. High-speed counting conventional 6 single-phase 10KHz
4. The touch panel adopts 32bit CPU, which runs fast. The performance is equivalent to Tk series HMI.
5. The HMI and PLC can be encrypted separately. PLC password with 12345678 can completely prohibit program reading, and cannot modify the clock data. (Note: PLC only supports 8-bit password encryption)
6. Supports external interruption and watchdog function. 7 inch all-in-one machine can select 1 channel to load cell (accuracy is 24 bits) or a CAN communication port.
7. Applies space 3.81mm pluggable terminal, which is convenient for wiring.
8. PLC is compatiable with Mitsubishi programming software. HMI uses mView programming software.

We are committed to providing you with a variety of solutions, such as ROM, Resolution, CPU, ect.