Full 10 / 100Mbps 4+2 VLAN POE Switch 250m 4 POE Ports and 2 Uplink Ports
4+2 POE Switch Full 10/100Mbps 250m 4 POE Ports and 2 Uplink Ports with VLAN
Main Advantages of the POE Switch
1. Support 100M or 250M transmission distance
2. Support VLAN to inhibit network storm, POE Watchdog
3. Surge 4KV, ESD 8KV
Technical Parameter
| Product information | describe | |
| Power information | Power supply mode | External power adapter |
| Voltage range | DC48V-57V | |
| network information | Network port | 1-4 downlink POE port: 10/100Mbps |
| 2*UPLINK RJ45 ports:10/100Mbps | ||
| transmission distance | 1-4 downlink RJ 45ports :100m(100Mbps ) 250m(10Mbps ) | |
| 2*UPLINK RJ45 ports:0-100m | ||
| Transmission medium | Cat 5 and above unshielded twisted pairs | |
| Network standard | IEEE 802.3/802.3u, IEEE 802.3x, IEEE 802.1p, IEEE 802.3az | |
| exchange capacity | 1.2Gbps | |
| Packet forwarding rate | 0.8928Mpps | |
| MAC Address Capacity | 2K | |
| POE information | POE stand | IEEE802.3af/at |
| POE type | End-to-end spanning method(1/2+,3/6-) | |
| POEPort characteristics | The output power of the port is 15.4W/30W and the total power is 65W/120W. | |
| Status light | Power lamp | The red light is on, representing normal work. |
| Network Indicator | Green light, on behalf of Link/act working normally | |
| POE indicator light | Yellow light flashes, representing POE working normally | |
| Operating environment | working temperature | 0℃～55℃ |
| Storage temperature | -20℃~70℃ | |
| Humidity (no condensation) | 20~95% | |
| Organism attribute | Size (length * width * height) | 132mm*65mm*32mm |
| Material Science | sheet metal | |
| colour | Black | |
| Weight | 215g | |
| Warranty | 1-3years | |
Product Introduction
POE power switches support IEEE802.3af/at Ethernet power supply standard. The power supply distance is 100 meters and only supplies power to 802.3af/at terminal equipment. Therefore, there is no need to worry about damage to private standard POE or non-POE equipment. In addition, when the POE device is disconnected, it will stop power supply. Simple and reliable design, automatic identification of POE requirements, duplex and use of AutoUplink-TM type of network. The economic price of this series provides a number of commercial networks that require simplified wireless access points (AP) and IP-based webcam installation. These devices away from power sockets are ideal for hanging on walls or ceilings. POE eliminates the hassle of connecting these devices to power outlets. Make the equipment which is difficult to connect to AC power supply more flexible, and minimize the installation cost. With compact and flexible design, this series of POE power switches are ideal for small commercial networks that want to deploy wireless access points (AP) and IP-based network surveillance cameras economically using POE.
Features
1. Complying with the standards of 802.310 Base-T and 802.3u100Base-TX
2. Flow control mode: full duplex adopts IEEE 802.3X standard, half duplex adopts Backpress standard, 10/100M adaptive RJ45 port.
3. Support for Port Automatic Flip (AutoMDI/MDIX)
4. Each port meets secondary lightning protection requirements and supports port isolation
5. Support for fixed port VLAN (IEEE 802.1Q VLAN)
6. Maximum POE power: TBC series 65W (all POE ports, 1-4 ports), 15.4W per port, maximum 30W
7. All ports support line-speed switching and can achieve line-speed in 64-1536 frame length range.
Product picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.