Video Digital Optical Converter

8CH AHD/TVI/CVI Video Digital Fiber Converter Single Mode 1080P with RS485 Technical parameter Optical interface Physical fiber interface FC/PC Optical wavelength Single mode 1310,1550nm TX power ≥-8dBm Receiving sensitive ≤-30dBm Transmitting distance Single mode 20Km / 40Km / 60Km / 80Km for option Video interface Video 8CH Signal format HD-CVI,HD-AHD or HD-TVI Input / Output impedance BNC 75Ω(unbalance) Input / Output voltage 1Vp-p Receiver rise and fall time

Industrial RS232/RS422/RS485 Serial to Fiber Converter Multimode Dual Fiber 2Km Technical Parameters Standard EIA /TIA RS232, RS-422, RS-485 Fiber Connector SC standard, ST/FC optional Fiber Distance 50/125um MMF: 2Km, 62.5/125um MMF: 5Km, 9/125 SMF:20/40/60/80Km Serial Connector RS-232 ,RS-422, RS-485: phoenix terminal Serial Distance RS-232 port 15m, RS-422, RS-485: 1500 meters Rate 0-120Kbps Baud Rate 300 Baud to 115,200 Baud RS-485 D+, D-, GND RS-422 R+, R-, T+, T-, GND

720P/1080P 16ch AHD CVI TVI HD Video Fiber Converter 0-80km with/without RS485 Technical parameter Parameter Specifications Optical Interface FC (default) ,SC,ST (optional) Fiber Type Single mode, single fiber (default) Distance 0km~80km Wavelength 1310nm/1550nm HD Video Interface BNC Input level >500mVp-p Output level 1Vp-p Input/Output Impedance 75 Ω Bandwidth 30MHz(720P); 60MHz(1080P) Digit bit width 8bit Data Interface Standard industrial terminals Interface Signals RS485

8CH AHD/TVI/CVI Video Digital Optical Converter with 1 SC/ST/FC/LC Port and 8 BNC Ports Technical Parameters Optical Wavelength 1310nm&1470nm-1610nm Fiber Type Single mode, single fiber(default) Distance 0km~80km Fiber interface FC(default) ST / SC (optional) HD Video Video Interface Number 16 Physical Interface BNC Video input and output impedance 75Ω (unbalanced) Input level >500mVp-p Output level 1Vp-p Digit bit width 8bit Support camera pixels 3 megapixel, 4 megapixel, 5

720P/1080P AHD CVI TVI 8ch HD Video to Fiber Converter 0-80km with/without RS485 Technical parameter Parameter Specifications Optical Interface FC (default) ,SC,ST (optional) Fiber Type Single mode, single fiber (default) Distance 0km~80km Wavelength 1310nm/1550nm HD Video Interface BNC Input level >500mVp-p Output level 1Vp-p Input/Output Impedance 75 Ω Bandwidth 30MHz(720P); 60MHz(1080P) Digit bit width 8bit Data Interface Standard industrial terminals Interface Signals

4ch Telephone Fiber Converter with 1 10/100Mbps Ethernet Ports Overview 4ch Telephone Fiber Converter with 1 10/100Mbps Ethernet Ports uses a special digital multiplexing chip, which integrates almost all digital logic functions in the device, thus significantly improving the performance of the product and reducing the cost. The equipment has excellent performance, stable and reliable operation, low power consumption, high integration, small size and easy installation and

Technical parameter Transmitter Video Input Impedance 75 (Unbalanced) Video Input Amplitude 0.8-1.5VPP Video Compatible Format PAL, NTSC Video Interface BNC Signal Bandwidth 8MHZ Power Supply DC12V/1A Receiver Signal Output Amplitude 0.9-1.1VPP Output Polarity Positive Output Impedance 75(Unbalanced) Video Interface BNC Power Supply DC12V/1A RS485 Output Parameter(Switch with VIDEO 1) Quantity of Node Supported 10

4ch Video Optical Converter 4 BNC Video Tx + 1ch RS485 Data Rx Technical Parameters Optical Wavelength 1310nm/1550nm Output Power -8~3dBm Optic fiber Single mode (9/125um) 20Km, multimode (50/125um) 1Km, ( 62.5/125um) 500m Receiving sensitivity -30dBm Interface FC standard, ST/SC optional Video Channel Quantity 4ch, from camera to control center Compatible Systems NTSC/PAL/SECAM Impedance/Voltage BNC 75Ω (unbalanced) / 2.0Vp-p Differential Gain < ±1% Differential Phase < ±1 S

4CH AHD/TVI/CVI Video Digital Fiber Converter Single Mode 1080P with RS485 Technical parameter Model No. AEO-HDVC401 Optical interface Physical fiber interface FC/PC Optical wavelength Single mode 1310,1550nm TX power ≥-8dBm Receiving sensitive ≤-30dBm Transmitting distance Single mode 20Km / 40Km / 60Km / 80Km for option Video interface Video 4CH Signal format HD-CVI,HD-AHD or HD-TVI Input / Output impedance BNC 75Ω(unbalance) Input / Output voltage 1Vp-p Receiver rise and

2ch Video Digital Fiber Converter 20km Single Mode Single Fiber for Analog Camera Technical Parameters Optical Wavelength 1310nm/1550nm Output Power -8~3dBm Optic Fiber Single mode (9/125um) 20Km to 80Km Multimode (50/125um) 1Km, ( 62.5/125um) 500m Receiving Sensitivity -30dBm Interface FC/ST/SC/LC Video Bandwidth 8MHZ Compatible Systems NTSC/PAL/SECAM Impedance/Voltage BNC 75Ω (unbalanced) / 2.0Vp-p Differential Gain < ±1% Differential Phase < ±1 S/N ratio >60dB(weighting)(8

Video Digital Fiber Converter 1BNC +1Data Fiber Coaxial Analog Video Optical Transceiver Technical Parameters Optical Wavelength 1310nm/1550nm Output Power -8~3dBm Optic fiber Single mode (9/125um) 20Km, multimode (50/125um) 1Km, ( 62.5/125um) 500m Receiving sensitivity -30dBm Interface FC standard, ST/SC optional Video Channel Quantity 1ch, from camera to control center Compatible Systems Compatible Systems Impedance/Voltage BNC 75Ω (unbalanced) / 2.0Vp-p Differential Gain <

Industrial DB9 RS485 / RS422 / RS232 Fiber Optic Modem 1. Description Industrial RS485/RS422/RS232 Fiber Media Converter is a sort of more function and economy RS-485/422 interface optic fiber MODEM. It is the best choice to connect RTU to HOST or SC ADA controller. It used Optic fiber as transfer medium, increase the transfer function of system. Communication equipment abstain menace effective to lightning strike, surge, electromagnetism disturb under the secure environment.

3ch 500m Analog Video Multiplexer With RS485 PTZ Data Technical parameter Nominal input & output level 1 Vp-p Nominal input & output impedance 75 Ω Video interface Channels Video interface type BNC Trunk interface type BNC Transmission distance 800M Transmission signals Video, RS485 Operating temperature -20℃ ~ 70℃ Working voltage DC 12 V ±5% Baud Rate 300-57600bps Interface Double terminal block Storage temperature -20℃ ~ 70℃ Transmission cable Coaxial Relative Humidity 0 ~

32 CH TVI CVI AHD Video to Fiber Converter Single Mode Single Fiber 20KM Technical parameter Optical Wavelength 1310nm&1470nm-1610nm Fiber Type Single mode, single fiber(default) Distance 0km~80km Fiber interface FC(default) ST / SC (optional) HD Video Video Interface Number 32 Physical Interface BNC Video input and output impedance 75Ω (unbalanced) Input level >500mVp-p Output level 1Vp-p Bandwidth 30MHz(720P); 60MHz(1080P) Digit bit width 8bit Support camera pixels 3

4CH 1080P AHD/CVI/TVI Video To Fiber Optic Converter With 1CH RS485 Technical Parameters Optical Wavelength 1310nm&1470nm-1610nm Fiber Type Single mode, single fiber(default) Distance 0km~80km Fiber interface FC(default) ST / SC (optional) HD Video Video Interface Number 16 Physical Interface BNC Video input and output impedance 75Ω (unbalanced) Input level >500mVp-p Output level 1Vp-p Digit bit width 8bit Support camera pixels 3 megapixel, 4 megapixel, 5 megapixel Video

4ch Single Fiber Single Mode Telephone Fiber Converter for 20-100km Technical Parameters Optical Wavelength 1310nm/1550nm Output Power -8~3dBm Optic Fiber Single mode (9/125um) 20Km to 80Km Multimode (50/125um) 1Km, ( 62.5/125um) 500m Receiving Sensitivity -30dBm Interface FC/ST/SC/LC Telephone Phonetic Bandwidth 8KHz Work Mode Point to point hot line, program controlling switch/extension mode Distortion 95dB Interface RJ11 or RJ45 Ethernet Work Mode Full duplex / half duplex

Video Fiber Converter Customized Video, Data, Ethernet, Telephone, Audio, Contact Closure Technical Parameters Optical Wavelength 1310nm/1550nm Output Power -8~3dBm Optic Fiber Single mode (9/125um) 20Km to 80Km Multimode (50/125um) 1Km, ( 62.5/125um) 500m Receiving Sensitivity -30dBm Interface FC/ST/SC/LC Video Bandwidth 8MHZ Compatible Systems NTSC/PAL/SECAM Impedance/Voltage BNC 75Ω (unbalanced) / 2.0Vp-p Differential Gain < ±1% Differential Phase < ±1 S/N ratio >60dB

MINI 1CH Video Optical Converter Single Mode / Multimode Single/Dual Fiber Technical Parameters Optical Wavelengt 1310nm/1550nm Output Power -8~3dBm Optic fiber Single mode (9/125um) 20Km, multimode (50/125um) 5Km, ( 62.5/125um) 2Km Receiving sensitivity -30dBm Interface FC standard, ST/SC optional Video Channel Quantity 1ch, from camera to control center Compatible Systems NTSC/PAL/SECAM Impedance/Voltage BNC 75Ω (unbalanced) / 2.0Vp-p Differential Gain < ±1% Differential

Multi-functional 20km Video Fiber Converter with Audio/RS485/Video/RS232/Alarm/Ethernet Technical Parameters Standard EIA /TIA RS232, RS-422, RS-485 Fiber Connector SC standard, ST/FC optional Fiber Distance 50/125um MMF: 2Km, 62.5/125um MMF: 5Km, 9/125 SMF:20/40/60/80Km Serial Connector RS-232 ,RS-422, RS-485: phoenix terminal Serial Distance RS-232 port 15m, RS-422, RS-485: 1500 meters Rate 0-120Kbps Baud Rate 300 Baud to 115,200 Baud RS-485 D+, D-, GND RS-422 R+, R-, T+, T

DC 12 ~ 48V Multimode Fiber To Single Mode Fiber Converter -20 - 60℃ Working Temperature Technical parameter Parameter Specifications Ethernet Standard:10/100Base-T(x) Speed:10/100M auto-sensing Working: TCP Server, TCP Client, UDP and Real COM driver Memory: Most 32Kbyte Transmission: 100m Electromagnetism isolate: 1KV Connector: RJ45 Serial Standard: RS-232/RS-485/RS-422 Signals: RS-232:DCD,RXD,TXD,DTR,GND,DSR,RTS,CTS RS-485:Data+,Data-,GND RS-422:TXD+,TXD-,RXD+,RXD-,GND