Intelligent Monitoring Box PoE Switch IoT Box All In One Management Control Box
IoT Box PoE Switch IoT Intelligent Control Box All in One Management Control Box
Technical Parameter
| 220V AC power supply air switch | 1 set, 220V/20A | |
| 220V AC power supply lightning arrester |
1 set power lightning arrester: 220V max: 40kA, In: 10KA Voltage protection Level≤1.1kV Adding 1.2/50us (8-20us ) combined wave of L-N, 2KV does not cause to malfunction, 6KV is non-damaged, the upper limit is 10KV. |
|
| Auto-reclosing |
Working voltage: 175-275VAC 50-60Hz Rated output current: 10A Electric leakage protection / action time: 300mA/≤0.1S Over voltage protection / action time: AC275V/2-5S Under voltage protection / action time: AC145V/2-5S Over current protection / action time: 16A/2-5S Short circuit protection/ action time: 3 times input current/≤0.1S Detection function before closing, with remote control function |
|
| AC24V power supply | 1 set of AC100-264V input, AC24V/2.5A output, 60W AC power supply | |
| DC52V power supply | 1 set of AC100-264V input, DC52V/4.8A output, 250W DC power supply | |
| DC12V power supply | 3 set of AC100-264V input, DC12V/8.5A, DC power supply with total power of 90W | |
| Power Consumption | Standby<50W, Full Load<1500W | |
| Data Control Unit | ||
| Main control boardparameters |
Flash:4GByte DDR: 512MByte CPU: ARM 600MHz |
|
| Data port |
1ch RS232 data 1ch RS485 data 2ch switch interface |
|
| Extended Function port |
1ch fan control 1ch lighting control 1ch automatic heating control 1ch local storage SD card slot 1ch water leak detection control 1ch 4G wireless routing expansion slot |
|
| Alarm Output port |
1ch alarm output 1ch door status output 1ch status indicator output 1ch automatic lighting status output |
|
| Controlled Power Supply |
1ch 24VAC output 3ch 12VDC output Support remote control |
|
| Ethernet port | 1*10/100Base-TX RJ45 port for transmitting control signals | |
| Ethernet Standard | IEEE802.3 10Base-TX, IEEE802.3u 100Base-TX | |
| Screen Display | A status display LCD screen, used to display the address of the device, query the status of various control switches | |
| Door Alarm switch | Unpacking alarm signal output | |
| PoE Power Supply Transmission Unit | ||
| Fixed Port |
7*10/100/1000Base-T PoE ports (Data/Power) 1*10/100/1000Base-T uplink RJ45 ports (Data) 2*100/1000Base-X uplink SFP fiber slot ports (Data) 1*Console RS232 port (115200,N,8,1) |
|
| Ethernet Port | Port 1-8 can support 10/100/1000Base-T auto-sensing,Full/half duplex MDI/MDI-X self-adaption | |
| Twisted Pair Transmission |
10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter) |
|
| Optical Fiber Port | Gigabit SFP optical fiber port, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) | |
| Optical Cable/ Distance | Multi-mode:850nm/ 0~500m, Single-mode:1310nm/ 0~40km,1550nm /0~120km. | |
| Chip Parameter | ||
| Network Management Type | L2+ | |
| Network Protocol |
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X IEEE802.3x |
|
| Forwarding Mode | Store and Forward(Full Wire Speed) | |
| Switching Capacity | 192Gbps (non-blocking) | |
|
Forwarding Rate@64byte |
14.88Mpps | |
| MAC | 8K | |
| Buffer Memory | 4M | |
| Jumbo Frame | 9.6K | |
| LED Indicator | Power: PWR (green), system:SYS (yellow), network:Link (yellow), PoE: PoE (green), Fiber port : L/A (green) | |
| Reset Switch | Yes, support one key to restore factory settings | |
| PoE & Power | ||
| PoE Port | Port 1 to 7 | |
| PoE Management |
PoE working status Delay start of power supply PoE output priority configuration Scheduling of PoE operation and time Total power limit of PoE power supply PoE output power allocation, off& af &at |
|
| Power Supply Pin | Default: 1/2 (+), 3/6 (-) | |
| Max Power Per Port | 30W, IEEE802.3af/at | |
| Total PWR / Input Voltage | 250W/52VDC | |
| Power Consumption | Standby<8W, Full Load<240W | |
| Physical Parameter | ||
| Operation TEMP / Humidity | -40~+75°C,5%~90% RH Non condensing | |
| Storage TEMP / Humidity | -40~+80°C,5%~95% RH Non condensing | |
| MTBF | >100000 hours | |
| Dimension (L*W*H) | 542*440* 280mm | |
| Net /Gross Weight | <26kg / <28kg | |
| Installation | Pole hoop mount | |
| Certification & Warranty | ||
| Lightning protection / protection level | Lightning protection: 6KV 8/20us; Protection level: IP55 | |
| Certification | CCC, CE mark, commercial, CE/LVD EN60950, | |
| Warranty | 3 years, lifelong maintenance. | |
Product Overview
It is an intelligent transmission and power control system with high integration, high functionality, and simple use. It has a modular structure and provides multiple sets of power output and remote monitoring control. The transmission module can be selected according to the application requirements to realize the optical transmission of various topologies. The IoT comprehensive intelligent box consists of project requirements, integrated PoE power supply network transmission module, port lightning protection module, power supply control module, etc.
Features
- Built-in lightning protection module, air switch, input voltage detection, input voltage overload/underload alarm, lightning strike count indication.
- Modular design, centralized the power supply, automatic reclosing, voltage short circuit trip, self-recovery power supply. More than 1 set AC220V power output, 3 set DC12V output, 1 set AC24V output, 1 set DC52V output.
- Remote PoE power supply and management, multi-channel UTP network connection, fiber connection, link alarm, supporting fiber optic splice trays and fiber optic adapter.
- Power failure detection, voltage, current monitoring, on-site recording and remote viewing of device name and model, voltage output, real-time reporting of detection results, positioning of equipment through cloud platform and online map.
- The IoT intelligent box related information can be managed by the QR code in the box to record all status information and logs of the device.
- The mechanical lock installed in the box provides the function of preventing the box from being disassembled, and when the box door is opened, the operation and maintenance platform actively gives an alarm prompt.(Optional)
- The network management data is output through Ethernet and the key data of operation.
Product picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.