Ring Loop Fiber POE Switch Full Gigabit 4 POE Ethernet 2 Optical Port
Ring Loop Fiber POE Switch Full Gigabit 4 POE Ethernet 2 Optical Port
The main advantages of the Ring Loop Ethernet Fiber Switch:
● Support IPC extender to extend the IPC access distance to be 250M
● Support VLAN function: Block mutual communication between downlink ports; improve the efficiency of data forwarding to ensure the safety of system, inhibit network storm functions: automatic identification and filtering broadcast packets.
● Support the CBIT to ensure the HD image.
Technical Parameters
| Network Ports | Four 10/100/1000Base-T(X) adaptive POE Ethernet port | |
| Network Ports Properties | RJ45 | |
| Network Ports protocol | IEEE802.3,IEEE802.3U,IEEE802.3X protocol | |
| Ports Features | Support half-duplex, full-duplex, auto-negotiation mode | |
| Ports Features | Support MDI/MDI-X adaptation | |
| Delay | ﹤9.6μS | |
| Bit Error Rate | ﹤1/1000000000 | |
| Backplane Bandwidth | 12G | |
| Cache | 1M | |
| MAC address table | 1K | |
| Power consumption | ≤5W | |
| Transmission Rate | 10/100/1000Mbps | |
| Optical Fiber Ports | 2 10/100/1000Mbps Single Mode FC Optical Fiber Ports | |
| Optical Fiber Ports Properties | Wave Length:1310/1550nm | |
| Transmission Distance | 20-100KM | |
| POE protocol | IEEE802.3af/at | |
| Pin Definition | V+,V+,V-,V- Corresponding to 1,2,3,6 | |
| Output Power | 15.4W | |
| Rated Input voltage | +44~+57VDC | |
| Operating Temperature | -40 ~ 85℃ | |
System Overview
The Ring Loop POE Fiber Switch is full gigabit 2 optical ports and 4 POE ethernet ports, it uses the design of industrial redundant ring net, and you can find two fiber ports which make up the ring net in every transmission equipment. The ring network topology structure is composed through hand in hand cascading, which can achieve no phase delay transmission of the 1080p HD network signals.
Product Features
- Supporting all the network HD cameras and other network signals;
- Being compatible for IEE802.3,IEEE802.3U,IEEE802.3X and other internet protocol;
- Supporting the transmission pattern of full-duplex and half-duplex, with the ability of automated negotiation;
- Having the function of setting ring net in all the devices, and change transmission while the disconnection of the intermediate node;
- Supporting POE on the network port;
- Providing the transmission of ultra low delayed data;
- Protecting from network broadcast radiation;
- Providing 4 set adaptive Ethernet ports, which can link with internet camera, the switch and so on;
- Adapting parallel or cross-wire connection;
- Having APC circuit, with constant optical power output and wide dynamic range;
- 10/100/1000Mbps optical fiber transmission, with large capacity which could be upgraded easily;
- Having advanced adaptive technology, no field of the use of optical or electrical adjustment
- Adapting three-level lighting protection technology on the computer ports and network signals.
- Support dial the code switch to set up monitoring mode function, extended the IPC access distance to be 250M
- Support VLAN function: Block mutual communication between downlink ports; improve the efficiency of data forwarding to ensure the safety of system, inhibit network storm functions: automatic identification and filtering broadcast packets.
- Support the din rail & desktop installation
- Support the CBIT to ensure the HD image.
Product picture
Application Diagram
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.