IPC Extender 250m 10 Port 48V DC Powered POE Switch
Industrial 10 Port Fiber POE Switch 2 Gigabit SFP and 4 10/100Mbps Ethernet and 4 10/100Mbps SFP
Technical Parameters
| 10/100Mbps Network Ports | 4 |
| 10/100Mbps Optical Ports | 4 |
| 10/100/1000Mbps Optical Ports | 2 |
| Network Ports Properties | RJ45 |
| Network Ports Properties | IEEE802.3,IEEE802.3U,IEEE802.3X protocol |
| Support | Support half-duplex, full-duplex, auto-negotiation mode |
| Support | Support MDI/MDI-X adaptation |
| Delay | ﹤9.6μS |
| Bit Error Rate | ﹤1/1000000000 |
| Backplane Bandwidth | 7.6G |
| Cache | 1Mbit |
| MAC address table | 8K |
| Max Frame Length | 1632bytes |
| Power consumption | <10W |
| Transmission distance | 0-100km |
| Exchange way | Store-and-Forward |
| IPC Extender | IPC to switch can be 200m |
| VLAN | support |
| CBIT | support |
| Power terminal | 6 PIN industrial terminal, one way relay alarm output |
| Overload protection | support |
| Reverse connect protection | support |
| Redundancy protection | support |
| Power input | DC12V~48V |
| Operating Temperature | -40 ~ 85℃ |
| Working humidity | 5% ~ 95% |
System Overview
The Fastcabling 10 Port Fiber Optic SFP switch features 2 Gigabit SFP and 4 10/100Mbps Ethernet and 4 10/100Mbps SFP. It can be used as a central management for multipoints IP devices at different locations. Gigabit speed fiber ports deliver high-speed networking for multiple remote IP powered devices, such as IP camera, VoIP phone, wireless Aps, etc. It allows you to interconnect up to 6 SFP modules of different or similar SFP modules to reach long distance fiber optic link, including SC/LC fiber types. With Gigabit uplink port, the switch can uplink to backbone or high capacity servers. It greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
Product Features
- Supporting all the network HD cameras and other network signals;
- Being compatible for IEE802.3,IEEE802.3U,IEEE802.3X and other internet protocol;
- Supporting the transmission pattern of full-duplex and half-duplex, with the ability of automated negotiation;
- Having the function of setting ring net in all the devices, and change transmission while the disconnection of the intermediate node;
- Support dial the code switch to set up monitoring mode function, extended the IPC access distance to be 250M
- Support VLAN function: Block mutual communication between downlink ports; improve the efficiency of data forwarding to ensure the safety of system, inhibit network storm functions: automatic identification and filtering broadcast packets.
- Having APC circuit, with constant optical power output and wide dynamic range;
- Optical fiber transmission, with large capacity which could be upgraded easily;
- Support the din rail & desktop installation
- Support the CBIT to ensure the HD image.
- Providing the transmission of ultra low delayed data;
- Protecting from network broadcast radiation;
- Adapting parallel or cross-wire connection;
- Having advanced adaptive technology, no field of the use of optical or electrical adjustment
- Adapting three-level lighting protection technology on the computer ports and network signals.
Product picture
Application Diagram
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.