1632 Bytes 10 Port Gigabit Ethernet Switch With Fiber Optic Ports

Price Negotiable

Price: negotiation

MOQ: 1 piece

Delivery Time: 5-8 working days

Brand: AEO

Product Description

Gigabit Optical Fiber Switch 2 Gigabit SFP and 4 10/100Mbps Ethernet and 4 10/100Mbps SFP

Technical Parameters

10/100Mbps Network Ports	4
10/100Mbps Optical Ports	4
10/100/1000Mbps Optical Ports	2
Network Ports Properties	RJ45
	IEEE802.3,IEEE802.3U,IEEE802.3X protocol
Support	Support half-duplex, full-duplex, auto-negotiation mode
Support	Support MDI/MDI-X adaptation
Delay	﹤9.6μS
Bit Error Rate	﹤1/1000000000
Backplane Bandwidth	7.6G
Cache	1Mbit
MAC address table	8K
Max Frame Length	1632bytes
Power consumption	<10W
Transmission distance	0-100km
Exchange way	Store-and-Forward
IPC Extender	IPC to switch can be 200m
VLAN	support
CBIT	support
Power terminal	6 PIN industrial terminal, one way relay alarm output
Overload protection	support
Reverse connect protection	support
Redundancy protection	support
Power input	DC12V~48V
Operating Temperature	-40 ~ 85℃
Working humidity	5% ~ 95%

System Overview

10 ports Gigabit Fiber Ethernet Switch has 4 10/100M UTP port and 4 10/100M SFP ports and 2 1000M SFP sockets/slots. Customer can choose different 1000M SFP module according as his demand, such as 1000Base-T, 1000Base-SX or 1000Base-LX etc. The product is possessed of stable performance, excellent quality and reasonable price with adopting latest IC from USA. It is applicable to use in constructing of Optical Fiber Ethernet.

Product Features

Supporting all the network HD cameras and other network signals;
Being compatible for IEE802.3,IEEE802.3U,IEEE802.3X and other internet protocol;
Supporting the transmission pattern of full-duplex and half-duplex, with the ability of automated negotiation;
Having the function of setting ring net in all the devices, and change transmission while the disconnection of the intermediate node;
Support dial the code switch to set up monitoring mode function, extended the IPC access distance to be 250M
Support VLAN function: Block mutual communication between downlink ports; improve the efficiency of data forwarding to ensure the safety of system, inhibit network storm functions: automatic identification and filtering broadcast packets.
Support the din rail & desktop installation
Support the CBIT to ensure the HD image.
Providing the transmission of ultra low delayed data;
Protecting from network broadcast radiation;
Adapting parallel or cross-wire connection;
It can switch Ethernet signals and optical signal.
Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
The SFP slot supports 1000M and Full Duplex mode.
Supports flow control and broadcast storm protection.
Supports VLAN and QoS.
It is low power consume, low heat, and good reliability.
Having APC circuit, with constant optical power output and wide dynamic range;
Optical fiber transmission, with large capacity which could be upgraded easily;
Having advanced adaptive technology, no field of the use of optical or electrical adjustment
Adapting three-level lighting protection technology on the computer ports and network signals.