Single Mode 10/100Mbps Fiber POE Switch With Optical Port
Industrial Switch 10/100Mbps 4 POE Ethernet and 2 Optical Ports
Technical Parameters
| Network Ports | Four 10/100Base-T(X) adaptive POE Ethernet port | |
| Network Ports Properties | RJ45 | |
| Network Ports protocol | IEEE802.3,IEEE802.3U,IEEE802.3X protocol | |
| Ports Features | Support half-duplex, full-duplex, auto-negotiation mode | |
| Ports Features | Support MDI/MDI-X adaptation | |
| Delay | ﹤9.6μS | |
| Bit Error Rate | ﹤1/1000000000 | |
| Backplane Bandwidth | 1.6G | |
| Cache | 1M | |
| MAC address table | 2K | |
| Power consumption | ≤5W | |
| Transmission Rate | 10/100Mbps | |
| Optical Fiber Ports | 2 10/100Mbps Single Mode FC Optical Fiber Ports | |
| Optical Fiber Ports Properties | Wave Length:1310/1550nm | |
| Transmission Distance | Adjacent Distance:0-100KM | |
| POE protocol | IEEE802.3af/at | |
| Pin Definition | V+,V+,V-,V- Corresponding to 1,2,3,6 | |
| Output Power | 15.4W | |
| Rated Input voltage | +44~+57VDC | |
| Operating Temperature | -40 ~ 85℃ | |
| IPC Extender | 250m | |
| CBIT | yes | |
| VLAN | yes | |
System Overview
This industrial switch features a redundant power input design, allowing for +12 ~ 48 V DC. The switch features an Overload Current Resettable Fuse which secures the system from overload currents. Additionally it also features Power Polarity Reverse Protect which tolerates reverse power wiring. A Relay Output is also available for an event alarm. In case of a power failure, the built-in LED will notify administrators by activating an alarm. The Hardware status can be verified by engineers by simply checking the LED, making troubleshooting quick and easy.
Product Features
- Supporting all the network HD cameras and other network signals;
- Being compatible for IEE802.3,IEEE802.3U,IEEE802.3X and other internet protocol;
- Supporting the transmission pattern of full-duplex and half-duplex, with the ability of automated negotiation;
- Having the function of setting ring net in all the devices, and change transmission while the disconnection of the intermediate node;
- Supporting POE on the network port;
- Providing the transmission of ultra low delayed data;
- Protecting from network broadcast radiation;
- Providing 4 set adaptive Ethernet ports, which can link with internet camera, the switch and so on;
- Adapting parallel or cross-wire connection;
- Having APC circuit, with constant optical power output and wide dynamic range;
- 10/100Mbps optical fiber transmission, with large capacity which could be upgraded easily;
- Having advanced adaptive technology, no field of the use of optical or electrical adjustment
- Adapting three-level lighting protection technology on the computer ports and network signals.
- Support dial the code switch to set up monitoring mode function, extended the IPC access distance to be 250M
- Support VLAN function: Block mutual communication between downlink ports; improve the efficiency of data forwarding to ensure the safety of system, inhibit network storm functions: automatic identification and filtering broadcast packets.
- Support the din rail & desktop installation
- Support the CBIT to ensure the HD image.
Product picture
Application Diagram
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.