Welding Rod Ss 308l Stainless Steel Welding Electrodes AWS E308l 16
AWS E308l 16 Welding Rod 3/32 Ss 308l Stainless Steel Welding Electrodes
E308L-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes
E308L-16 is a kind of Titanium calcium type coating with ultra-low carbon Cr19Ni10 stainless steel electrode. Carbon content of deposited metal is less than or equal to 0.04%. The intergranular corrosion resistance is good. Excellent welding performance and heat resistance, high strength coating, the porosity resistance is good. AC/DC both can be applied.
E308L-16 electrodes were developed for the welding of Type 304L stainless steels but can be used for many other stainless steels including Types 301, 302 & 304. They are used extensively for the welding of chemical plant equipment and may be used successfully for the welding of Types 321 and 347 stainless steels provided the service temperature is less than about 700°F (375°C). The basic-rutile thin coating of 308L-16 gives an excellent combination of welding performance in all positions and a high resistance to cracking. Operates on AC or DC current.
Conform to Standard
GB/T 983 E308L-16
AWS A5.4 E308L-16
Purpose: Used for welding ultra-low-carbon Cr19Ni10 stainless steel structures, and also used for 06Cr18Ni11Ti corrosion-resistant stainless steel structures whose working temperature is lower than 300°C. Mainly used in the manufacture of synthetic fiber, chemical fertilizer, oil and other equipments
Chemical Composition(%)
| Chemical Composition | C | Mn | Si | S | P | Cr | Ni | Mo | Cu |
| Guarantee Value | ≤0.04 | 0.50 ~ 2.50 | ≤1.00 | ≤0.030 | ≤0.040 | 18.0-21.0 | 9.0-12.0 | ≤0.75 | ≤0.75 |
| General Result | 0.024 | 1.3 | 0.62 | 0.008 | 0.02 | 19.9 | 9.8 | 0.04 | 0.035 |
Mechanical Properties of Deposited Metal
| Test Item | Rm(MPa) | A(%) |
| Guarantee Value | ≥510 | ≥30 |
| General Result | 580 | 45 |
| Diameter(mm) | Φ2.0 | Φ2.5 | Φ3.2 | Φ4.0 | Φ5.0 |
| Amperage(A) | 40~80 | 50~100 | 70~130 | 100~160 | 140~200 |
Notes:
1. The electrode must be preheated at the temperature of 300°C for 1 hour. Preheat the rod whenever it is used
2. Preferred DC power supply, electric current should not be high.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.