ISO Bearing Rtd Pt100 Thermal Sensor Surface Thermocouple Probe
ISO Bearing Rtd Pt100 Thermal Sensor Surface Thermocouple Probe
Connector RTD Holly'S Chip The Signal Is Stable Support Customization
Suspension connector is specially designed for quick connection, convenient overhaul, rapid wiring of the sensor signal cable of the hydro-generator and improving work efficiency. The stripping part of the sensor cable is transformed into this structure so that the sensor can be quickly disassembled and verified and achieve quick replacement at the later stage without rewiring. This device can also replace the damaged cable in the oil groove.
SP series temperature sensor--suspension connector
1. Product Introduction of the SP series temperature sensor--suspension connector
It solves the problem of wiring in the oil groove of temperature measurement resistor. During overhaul, it is not necessary to rewire in the oil groove.
During assembly and disassembly, just loosen the external connecting ring to eliminate the complicated steps of stripping and wiring.
The connector thread is opposite to the probe thread. When loosening the external connecting ring, the probe and the rear cable will not rotate correspondingly.
It can effectively resist vibration and impact and prevent the disconnection caused by pulling the cable. It is absolutely safe and reliable when being used, and it is easy to plug in and out in a very limited space.
2. Product Parameter (Specification) of the SP series temperature sensor--suspension connector
| Plugging times | 5000 times |
| Humidity | Up to 95% at 60℃ |
| Temperature range | -40℃ ~180℃ |
| Anti-vibration performance | 10~2000hz,15g |
| Anti-impact resistance | 100g,6ms |
| Salt spray corrosion test | >144h |
| Protection grade(when inserting) | IP68 |
| Shielding effect | >75db(at 10Mhz) / >40db(at 1Ghz) |
3. Product Feature And Application of the SP series temperature sensor--suspension connector
It is applied in wiring the oil groove of water-turbine generator set.
4. Product Details of the SP series temperature sensor--suspension connector
The cable insulation layer is made of high-temperature and tension resistant materials.In particular, magnetization resistance, temperature resistance and insulation performance shall be taken into consideration for packaging materials.
5. delivery, shipment and service of temperature sensors
The temperature sensor is packed in cartons. If you need, we can also make it for you.
6. FAQ
1, are your manufacturer?
We are manufacturer, our factory localed in Shenzhen China.
2, what product you manufacturer have?
Our factory produce temperature sensor for power station,
Stators and cable for industry.
3, how many production lines do you have?
We have 10 production lines in Shenzhen factory.
4, how do you ensure product quality?
We already built a mechanical,electrical,fire and flame retardant laboratory, professional testing engineers.
5, can you send samples?
Yes, we will supply sample before your make the order.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.