0.4-0.8mm thick filter round fingerprint resistant end cover

1. Product Description

  The end cap of the filter element mainly plays the role of sealing the two ends of the filter element and supporting the filter element. The filter element is pressed into various shapes according to the needs of the steel plate. The filter element is installed on the vehicle and the engine. During the mechanical operation, it will produce vibration, the end cap can effectively improve the bearing capacity of the filter material. One side of the end cap is pressed into a groove which can be used to place the end of the filter material and the adhesive. The other side is bonded with a rubber seal, the utility model has the function of sealing filter material and sealing filter element channel, and the end cover material is made of steel plate, plastic and foaming polyurethane, in which the foaming polyurethane can be heated with the filter material directly by the die, thus saving adhesive and sealing glue.

2. Specifications

  There are parts of specifications of filter caps we made for clients before for your reference. If you need other shapes, we could make customization.

3. Packing method

  The filter cover already has a protective film to achieve good end cover protection. In particular, in the transport process, to the bottle cap one by one packaging, to prevent bottle cap scratches. The end cover is packed and bundled with braided tape. Put the end cover into the plastic bag, and finally use high-quality wooden box packaging, transport fast, easy to load and unload forklift.

4. FAQ

  The filter end cover already has a protective film, which can achieve a good end cover protection function. Especially during transportation, the caps should be packed one by one to prevent the caps from being scratched. The end caps are packaged and bundled with a braid. Put the packaged end caps into plastic bags, and finally pack them in high-quality wooden boxes, which are fast and easy to load and unload with forklifts.

1.Certificates:

RoHs,UL,SGS,MSDS,DIN53438

2.Payment terms:

50% deposit upon getting the order,balance against the B/L copy.

3.Delivery date:

About 7 working days(≤500pcs), special order is negotiable to be quicker.

4.Sample Terms:

We can supply 1-2 small samples for tree but express cost is covered by your side.

5.Minimum Order Quantity:

No strict principle for standard sizes,but 50pcs for non-standard dimensions or types.

6.Price Terms:

EX-WORKS, FOB, CNF, CIF OR DDU is available and up to you.

7.Lead time:

3 Days for a 40ft container, weeks for two 40ft container.

5. matters needing attention

  The material selection of the end cover should be consistent with the connection method of the device, otherwise it cannot be used normally if it does not match the device. End covers of different materials are used in different temperature environments.