Brand: Yaskawa
Product Name: low inertia servo motor model: sgmav-10a3a6c z-V series servo motor sgmav type. Rated output: 1.0kw. Power supply voltage: ac200v
Serial encoder: 20 bit pair value (standard). Design sequence: standard.
Shaft end: straight shaft, with keyway and screw hole (optional). Optional: with holding brake (DC24V). High power change rate. Small capacity. Low inertia
Instantaneous large torque (rated ratio 300%).
Equipped with high-resolution serial encoder (20 bits). High speed up to 6000r/min
Complete varieties (50w~1.0kw, with holding brake). Example of use:
Semiconductor manufacturing equipment, chip mounter,
PCB punching machine, robot, handling machinery, food processing machinery. Rating and specification: rated time: continuous. Vibration level: v15
Edge resistance: DC500v, above 10m Ω. Operating ambient temperature: 0~40 °℃. Excitation mode: permanent magnet type. Installation method: flange type. Heat resistance grade: B.
Edge withstand voltage: ac1500v1 minutes.
Protection mode: totally enclosed self cooling IP65 (except for the shaft through part). Operating environment humidity: 20~80% (no condensation). Connection method: direct connection.
Rotation direction: CCW rotation when viewed from the load side under the forward rotation command. Z-V series servo motor sgmsv type rated output: 2.0kw. Power supply voltage: ac200v.
Serial encoder: 20 bit pair value type (standard). Design sequence: standard.
Shaft end: straight shaft, with keyway and screw hole (optional) Yaskawa sgmav-10a3a6c. Optional: with oil seal and holding brake (DC24V). High power change rate.
The sgmav-10a3a6c is equipped with a high-resolution serial encoder (20 bits). IP67 (IP22 for 7.0kw) is adopted as the standard. Application example: mounter.
PCB punching machine. Machine tool feeding device. Rating and specification: rated time: continuous. Vibration level: V15.
Edge resistance: DC500v, above 10m Ω, the ambient temperature of Yaskawa sgmav-10a3a6c: 0~40 °℃. Excitation mode: permanent magnet installation mode: flange type. Heat resistance grade: F.
Edge withstand voltage: ac1500v1 minutes (200V level), ac1800v1 minutes (400V level). Protection mode: totally enclosed self cooling IP67 (except for the shaft through part). Operating environment humidity: 20~80% (no condensation).
Connection mode: direct connection to Yaskawa sgmav-10a3a6c
Rotation direction: under the forward rotation command, it rotates in the counterclockwise direction (CCW) when viewed from the load side. The rated speed of servo motor sgmgh type: 1000r / min. Power: 5.5kW.
Power supply voltage: three-phase ac200v. Serial encoder: 17 bit pair value. Design sequence: for machine tool. Shaft end: straight shaft without key.
Option: Yaskawa low inertia servo motor with dc90v brake. High speed feed series: where high-speed operation is required without load, the power supply of the main circuit and the control circuit is completely separated, and only the power supply of the main circuit can be turned off during alarm, which is easy to maintain. Built in parameter setter.
Parameters can be directly input by the servo driver body. Save wiring.
Serial encoder is adopted, and the number of encoder wiring is reduced by 1/2 compared with the original product.
Multi in one control: use parameter switching to control Yaskawa low inertia servo motor with torque, position and speed. Servo motor sgmgh type. Rated speed: 1500r/min. Power: 0.85kw.
Power supply voltage: three-phase ac200v. Serial encoder: 17 bit relative value. Design sequence: a.
Shaft end: straight shaft with key and screw hole
Option: Yaskawa low inertia servo motor with DC24V brake. High speed feed series: where high-speed operation is required without load, the power supply of the main circuit and the control circuit is completely separated,
In case of alarm, only the power supply of the main circuit can be turned off, which is easy to maintain. Built in parameter setter.
Parameters can be directly input by the servo driver body. Save wiring.
Serial encoder is adopted, and the number of encoder wiring is reduced by 1/2 compared with the original product
Multi in one control: torque, position and speed control can be used by parameter switching. Sgmgh type motor is used in the same service, and the rated speed is 1000r / min. Power: 0.9Kw.
Power supply voltage: three-phase ac200v. Serial encoder: 17 bit pair value. Design sequence: B.
Shaft end: straight shaft with key and screw hole. Option: with oil seal
High speed feed series: where high-speed operation is required without negative load, the power supply of sgmav-10a3a6c main circuit and control circuit is completely separated,
In case of alarm, Keke only turns off the power supply of the main circuit, which is easy to maintain. Yaskawa sgmav-10a3a6c parameter setter is built-in.
Parameters can be directly input by the servo driver body. Save wiring.
Serial encoder is adopted, and the number of encoder wiring is reduced by 1/2 compared with the original product.
Multi in one control: torque, position and speed control can be used instead of parameter switching.
