1m Height 1/2 Inch Welded Wire Mesh Roll 25m Length 0.8 - 1.3mm Thickness
Welded Wire Mesh Roll, Wire Thickness 0.8 - 1.3mm Mesh 1/2 X 1/2 inches Width 1.0m Length 25m
Welded Wire Mesh Roll with 13mm x 13mm square opening is primarily made of low-carbon drawn wire, the color is black. If used in corrosion material, galvanzied surface treatment after welding should be the best choice.
This is a universal element that is used when pouring floors and plastering of walls, during finishing works. It should be usded to make the floor smooth, to prevent cracks, chipping during drying and shrinkage of the floor, and if the future floor will be subjected to heavy loads, when reinforcing the mesh is fixed above the surdace of the floor and covered with concrete mix.
Reinforcing welded wire mesh has the following features:
- promotes uniform disturbution of the load on the floor;
- prevents the formation of the chips and cracks on the screed;
- increases the density of the concrete composition;
- saves concrete fron destruction and deformations;
- ideal for floors with large differences.
Specification:
- Materials: low carbon steel wire
- Surface finish: no finished, electro galvanized, or hot dipped galvanzied.
- Wire diameter: 0.8mm - 1.3mm.
- Roll height: 1m
- Roll length: 25m, 50m.
- Mesh size: 1/2 * 1/2 inches
| Material | Surface finish | Wire DIAM | Mesh size | Roll size |
| Low carbons steel |
Electro galvanized
Hot dipped galvanzied |
0.8mm 0.9mm 1.0mm 1.3mm |
1/2 X 1/2 inches |
1 X 25m
1 X 50m |



Packing & Loading:
- Wrap with plastic film
- With labels
- All bulk in container
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.


