Galvanized Wire GI Wire Pneumatic Spot Welding Machine Synchronous Control
Blue Galvanized Wire Pneumatic Spot Welding Machine
1. Product description
Blue galvanized wire pneumatic spot welding machine is used for making panel mesh. The mesh pulling system is controlled by step motor, which makes the pulling mesh aperture more standard and accurate. This automatic pulling device can be separated from the welded machine. This machine can weld continuous wire mesh sheets. After the wire mesh sheets enter into the automatic cutting machine, the cutting machine can cut the wire mesh sheet into fixed-size according to you need.
2. Technical parameter
| Model | HY-DHW-1500 | HY-DHW-2000 | HY-DHW-2500 | HY-DHW-2800 | HY-DHW-3300 |
| Weld width(mm) | 1500 | 2000 | 2500 | 2800 | 3300 |
| Meshi trip(mm) | Single trip 3000 and no limit on return | ||||
| Std trans.spacing | >=25mm-stepless adjustable | ||||
| Std long.spacing | >=50mm, and progressive increase by 50 | >=100mm, and increase by 100 | |||
| Std weld spots | 31 | 41 | 51 | 27 | 32 |
| Wire diameter(mm) | 3.0-6.0 | 3.0-6.0 | 3.0-6.0 | 5.0-12.0 | 5.0-12.0 |
| Weld speed(times/min | 50-70 | 40-60 | 40-60 | 40-60 | 40-60 |
| Trans material | Straight bar/rod | Straight bar | |||
| Long material | Straight bar/rod | ||||
| Control mode | PLC programming servo motor stepper | ||||
| Mesh diagonal error | <=2 | ||||
| Mesh overall error | <=2 | ||||
| Air pressure | >=0.7 | ||||
| Weld material | Cold drawn wire, galvanized wire, cold rolled ribbed steel | ||||
3. Application area
The blue galvanized wire pneumatic spot welding machine can be used in concrete reinforcement, cages (chickens, dogs, farms, etc…), wire mesh fences, panels for construction, racks, platforms.
4. Advantages
a. Using our patented cross wire fallen device, the device is compact, rational layout, reliable work.
b. The weft wire of wire mesh welding machine feeding from the multi hopper which capacity is more over ten times than the traditional hopper.
c. This wire mesh welding machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system. The input front-panel is touch screen , the operate is more intelligent and reasonable.
d. The new wire mesh welding machine added the bear wire net and carry equipment that makes the working more convenience .
e. The welding part of wire mesh welding machine is used the springiness input wire trunking that makes the welding copper use for long time.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.