PLC Screen Servo Motor CNC Spot Welding Machine 3300mm Mesh Width
Automatic PLC Touch Screen CNC Spot Welding Machine
1. Product description
Automatic PLC touch screen CNC spot welding machine is used for making panel mesh. The reinforced mesh machine type 11 is equipment for welding fence mesh and mine timbering mesh. Both the line wire and cross wire are fed from pre-cut wires. The cross wires are fallen automatically, finished mesh is pulled by step motor. The line wires are fed manually, the cross wires falling automatically by step motor, when the wire diameter is 4-8mm, both the welding electrodes and transformer are equipped with water cooling system to prolong the service life.
2. Technical parameter
| Model | HY-DHW-1500 | HY-DHW-2000 | HY-DHW-2500 | HY-DHW-2800 | HY-DHW-3300 |
| Weld width(mm) | 1500 | 2000 | 2500 | 2800 | 3300 |
| Meshi trip(mm) | Single trip 3000 and no limit on return | ||||
| Std trans.spacing | >=25mm-stepless adjustable | ||||
| Std long.spacing | >=50mm, and progressive increase by 50 | >=100mm, and increase by 100 | |||
| Std weld spots | 31 | 41 | 51 | 27 | 32 |
| Wire diameter(mm) | 3.0-6.0 | 3.0-6.0 | 3.0-6.0 | 5.0-12.0 | 5.0-12.0 |
| Weld speed(times/min | 50-70 | 40-60 | 40-60 | 40-60 | 40-60 |
| Trans material | Straight bar/rod | Straight bar | |||
| Long material | Straight bar/rod | ||||
| Control mode | PLC programming servo motor stepper | ||||
| Mesh diagonal error | <=2 | ||||
| Mesh overall error | <=2 | ||||
| Air pressure | >=0.7 | ||||
| Weld material | Cold drawn wire, galvanized wire, cold rolled ribbed steel | ||||
3. Application area
The automatic PLC touch screen CNC spot welding machine can be widely used in mining, petroleum, chemistry, food, medicine, machine manufacturing industry. It is used for machine protection for the above industries.
4. Advantages
a. Small Operation Cabinets, It use to control different parts of machine. Near connect, clear and convenient worker operation.
b. The weft wire of wire mesh welding machine feeding from the multi hopper which capacity is more over ten times than the traditional hopper.
c. PLC control system: DELTA made in Taiwan.
d. Welding part can easily switch, which greatly improves the service life of machinery, maximum reduce the cost.
e. The machine line automatic degree can be according to request. For the economical type, line wire and cross wire are pre strainghtened and cut to length. We are capable to produce fully automatic machine.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.