Height 81mm Air Spring Assembly Replacement Firestone W01-358-7423 Contitech FD 330-22 368 Sauer P10-784
Min Height 81mm Firestone W01-358-7423 Contitech FD 330-22 368 Sauer P10-784 Air Spring Assembly Replacement
Cross reference
Air spring supplier: Firestone
Supplier number: W01-358-7423; W013587423; W01 358 7423; WO1-358-7423; WO13587423; WO1 358 7423
Air spring supplier: Contitech
Supplier number: FD 330-22 368; FD 330 22 368; FD 330-22368; FD330-22 368; FD330-22368; FD33022368
Specifications and Tecnical Parameters: 2B7423
|
1. Max. OD |
325mm |
|
2. Top plate Mounting Thread Qty |
2pcs, Single Combo Stud; one bolt/stud |
| 3. The distance between the combo stud and stud | 157mm |
| 4. Bottom plate bolt/stud Qty | 2pcs |
| 5. The distance between the two bolts/studs on bottom plate | 157mm |
|
6. Cover plate diameter(width) |
231 mm |
|
7. Min. Height |
81mm |
|
8. Max. height |
305mm |
|
9. Bumper block/bumper |
No/ Without |
|
10. Belt loop/Girdle ring/Girdle hoop |
one piece |
About Air Spring
An air spring could be defined as a reservoir of air made of rubber and fabric, which is shaped with bellows and that can be used to support load, isolate vibrations and shocks, or act as a pneumatic cylinder by expanding itself.
Increasing the load an air spring can carry can be achieved by increasing the pressure inside the air spring, increasing the diameter of the air spring (thus increasing the area), or both.
The ability to change the load carrying capacity only by changing the air pressure rather than replacing the air spring is the main advantage of air springs over steel springs. Since an air spring consists of a closed volume of air, compression of the air spring (bounce travel) causes an increase in pressure, and expansion of the air spring (rebound travel) causes a decrease in pressure.
The picture of 2B7423
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.