Stroke 224MM Goodyear Air Spring 2B12-311 Double Type Pneumatic Air Actuator
Price:
Negotiable
MOQ:
1 pieces
Delivery Time:
3-8 Working Days
Brand:
AIRSUSTECH
Product Description
Stroke 224MM Goodyear Air Spring 2B12-311 Double Type Pneumatic Air Actuator
Specifications and Technical Parameters
Minimum Usable Height: 81 MM
Maximum Usable Height: 305 MM
Air Hole Standard: G1/4
Threaded Hole Type: 2×M8×1.25
Cover Plate Diameter: 231 MM
Center Distance: 157.5 MM
Distance Between Air Inlet and Holes: 73 MM
Vibration Isolation - Dynamic Characteristics Values
| Pressure P [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
|---|---|---|---|---|---|---|---|
| Force (Load) [kN] | 10.0 | 13.3 | 16.7 | 20.6 | 24.1 | 27.6 | 12.0 |
| Spring Rate [N/cm] | 1590 | 1900 | 2210 | 2520 | 2830 | 3140 | |
| Natural Frequency [Hz] | 2.0 | 1.9 | 1.8 | 1.8 | 1.7 | 1.7 |
Pneumatic Application - Static Characteristic Values
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol.[l] |
|---|---|---|---|---|---|---|---|
| Height H [mm] 300 | 9.8 | 13.1 | 16.7 | 20.3 | 24.0 | 27.7 | 14.0 |
| 260 | 12.5 | 16.7 | 21.0 | 25.4 | 29.9 | 34.5 | 13.0 |
| 220 | 14.6 | 19.4 | 24.4 | 29.4 | 34.5 | 39.6 | 11.6 |
| 180 | 16.2 | 21.6 | 27.0 | 32.5 | 38.2 | 43.8 | 9.9 |
| 140 | 17.6 | 23.4 | 29.3 | 35.2 | 41.3 | 47.2 | 7.8 |
| 100 | 18.3 | 24.4 | 30.3 | 36.3 | 42.4 | 48.5 | 5.5 |
Other Part Numbers
- Firestone W01-358-7180/22
- Contitech FD 330-22 363
- Goodyear 2B12-425/311
- Triangle 6316/4363
- Vibracoustic VSP2B22R7180
- EI Ride 8030190
- Leland Sc2075
- Navistar 1685179C1
- Hendrickson 1VA1816
- Ridewell 1003587180C
- SAF Holland 57007180
- Watson & Chalinl AS0154 1G/01881F
- Peerless 0550 00001
Important Instructions for Using AIRSUSTECH Air Springs
Thrust: The thrust depends on the height of the bellow. When height increases, the thrust decreases.
- Before installing the air bellow, check it carefully for any damage it may have suffered from transport or improper storage.
- Do not inflate the air bellow until it has been secured properly.
Clearance: There must be enough clearance around the air bellow.
- The full surface of the metal parts is to be used to bear the forces.
- Air bellows must be equipped with lateral guides.
- Deflate the air bellows fully before removing.
- Ensure that the bellows is not constantly in contact with hydraulic oil, lubricants, solvents, metal cuttings and welding sparks.
- Should the air bellow be subjected to special media in an application, ask AIRSUSTECH for further information, specifying the medium, temperature and concentration.
Stops: To avoid damage when the bellow is compressed or extended, mechanical stops at both end positions have to be used.
Product Images
Factory Workshop
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Guangzhou Guomat Air Spring Co., Ltd.
Location
No. 1, Keyuan Road, Baiyun District, Guangzhou,Guangdong,,China
Contact Person
Vivi