Rubber Air Spring Festo EB-165-65 Industrial Air Bellows for Anti-Vibration Table
The production process and production process of the surface fabric of the air spring machine penetrate into the gap of the fabric, and the bonding of the process rubber and the fabric of the rubber rope formed by tight carding. Reduce shrinkage: The elastic deformation of the rubber should be reduced, so that the surface of the pressed rubber wire is smooth and the dimensional change is small. The air spring film required for the production of air springs usually uses a three-roller air spring machine. Through this process, it embodies the protection of the air spring in many ways, thus prolonging its service life.
- Contitech FS 70-7
- Contitech FS 707
- Contitech FS 70 7
- Phoenix SP 1B 05
- Bo sch 8224 19002
- Festo EB-165-65
- Festo EB16565
- Festo EB 165 65
- Weforma WBE 200-E1
- Weforma WBE 200E1
- Weforma WBE 200 E1
- Firestone W01-M58-6155
- Firestone W01M586155
- Firestone W01 M58 6155
Min. pressure: 0 bar
Return force to min. height: ≤200N
Overall weight with clamped plates: 1.3 kg
| Pressure P [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
|---|---|---|---|---|---|---|---|
| Force (Load) [kN] | 2.76 | 3.7 | 4.7 | 5.7 | 6.6 | 7.7 | 0.9 |
| Spring Rate [N/cm] | 1040 | 1270 | 1530 | 1770 | 2060 | 2325 | |
| Natural Frequency [Hz] | 3.1 | 2.9 | 2.9 | 2.8 | 2.8 | 2.7 |
| Pressure p | [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol.[l] |
|---|---|---|---|---|---|---|---|---|
| Height H [mm] | 100 | 2.2 | 3.1 | 4.0 | 4.8 | 5.7 | 6.6 | 1.0 |
| 90 | 2.7 | 3.6 | 4.6 | 5.6 | 6.5 | 7.5 | 0.9 | |
| 80 | 3.1 | 4.13 | 5.1 | 6.2 | 7.3 | 8.3 | 0.8 | |
| 70 | 3.4 | 4.5 | 5.6 | 6.7 | 7.9 | 9.0 | 0.7 | |
| 60 | 3.6 | 4.8 | 6.0 | 7.2 | 8.4 | 9.5 | 0.6 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.