FD 330-22 Suspension Air Springs 2B 6330 W01-358-7180 Helper Air Bags
FD 330-22 CONTITECH Double Convoluted Air Spring For Clean Room Washing Machine
AIRSUSTECH 2B6330 efer to FD 330-22 Contitech product description:
The air spring shock absorber AIRSUSTECH 2B6330 efer to FD 330-22 Contitech can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded
• In order to press the air spring shock absorber AIRSUSTECH 2B6330 efer to FD 330-22 Contitech to the minimum height, a restoring force is required. Usually, this is achieved by applying a load
• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 2B6330 efer to FD 330-22 Contitech must be used to absorb the force
• Before disassembling the air spring shock absorber AIRSUSTECH 2B6330 efer to FD 330-22 Contitech, the internal air must be released to prevent accidents and personal injury.
• During operation, the rubber air spring shock absorber AIRSUSTECH 2B6330 efer to FD 330-22 Contitech shall not be in contact with other parts
AIRSUSTECH 2B6330 Cross OEM Original Equipment Manufacturer:
AIRSUSTECH Part Number: 2B6330
Also known as: 74096,
Contitech Part Number: FD 330-22
Contitech Part Number: FD330-22
Comparable
Firestone Part Number: W01-358-7180 /22,
Firestone Part Number:W01-358-7180 /22,
Firestone Part Number:W01-358-7180 /22,
Firestone Part Number:W01-358-7180 /22,
Firestone Bellows Number:22
Technical Parameters of AIRSUSTECH 2B6330
| 1 Inch (pounds) | 7180 | 1 Inch (pounds) | 7180 |
| 3 Inch (pounds) | 6470 | 3 Inch (pounds) | 6470 |
| Maximum Stroke (pounds) | 3700 | Maximum Stroke (pounds) | 3700 |
| Equivalent High Strength Style Number | 210 | Equivalent High Strength Style Number | 210 |
| Extended Height (Similar End Closure) Style Number | 22_Ì1.5 | Extended Height (Similar End Closure) Style Number | 22_Ì1.5 |
| Material | 2-Ply Standard Cord | Material | 2-Ply Standard Cord |
| Bead plate Type | 3 | Bead plate Type | 3 |
| Blind Nut Centers (inches) | 6.2 | Blind Nut Centers (mm) | 157.48 |
| Port Offset from Blind Nut Centerline (inches) | 2.88 | Port Offset from Blind Nut Centerline (mm) | 73.152 |
| Design Height | 9.5 | Design Height | 241.3 |
| aximum Height (inches) | 10.1 | aximum Height (mm) | 256.54 |
| Maximum Stroke (inches) | 6.9 | Maximum Stroke (mm) | 175.26 |
| Minimum Usable Height (inches) | 3.2 | Minimum Usable Height (mm) | 81.28 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.