160166H-2 Suspension Air Springs Max Dia. 175mm For Inflatable
160166H-2 Suspension Air Springs AIRSUSTECH With Max Dia. 175mm For Inflat-able
160166H-2 Technical parameters
Nut / Blind Nut
Top Cover Plate Screw (Nut) Tooth :M10
Top Cover Distance Plate Screw (Nut) :135MM
Bottom Cover Plate Screw (Nut) Tooth :M10
Screw Center Distance of Bottom Cover Plate : 135MM
Gas Hole / Air inlet / Air Fitting
Gas Hole / Air inlet : /
Cover Plate
Top Cover Plate Diameter:160MM
Bottom Cover Plate Diameter: 160MM
Rubber Bellows
Rubber Bellows MAX Diameter: 170 mm
Rubber Bellows Natural Diameter :150 mm
The Working Stroke : MAX 190 mm to MIN 82mm
Maximum Height : 190 mm
Minimum Height :82 mm
Stroke Height : 108 mm
Bumper block / Buffer block
Without Bumper Block
Girdle Hoop / Girdle Ring
With Girdle Hoop :one Pieces of Girdle Hoop
The drawing of 160166H-2 Suspension Air Springs:
| Bearing load Power (kg) |
Inflation pressure | 0.2MPa | 0.3MPa | 0.4MPa | 0.5MPa | 0.6MPa | 0.7MPa | 0.8MPa | 0.7MPa Volume(dm³) |
|---|---|---|---|---|---|---|---|---|---|
| Installation height | |||||||||
| 82(mm) | 364 | 538 | 713 | 892 | 1071 | 1251 | 1430 | 0.86 | |
| 116(mm) | 262 | 397 | 537 | 674 | 815 | 950 | 1095 | 1.27 | |
| 150(mm) | 190 | 290 | 391 | 490 | 597 | 700 | 802 | 1.64 | |
| 166(mm) | 149 | 237 | 325 | 413 | 502 | 593 | 684 | 1.77 | |
| 190(mm) | 76 | 128 | 180 | 233 | 287 | 342 | 398 | 1.92 | |
| 201(mm) | 23 | 55 | 83 | 111 | 148 | 183 | 220 | 1.95 | |
| Stiffness and frequency at design height | Vertical stiffness(Kg/cm) | 39 | 54 | 72 | 89 | 107 | 125 | 138 | |
| Stiffness and frequency at design height | Natural frequency Hz | 2.56 | 2.40 | 2.35 | 2.33 | 2.31 | 2.30 | 2.25 | |
| Stiffness and frequency at design height | Natural frequency cpm | 154 | 144 | 141 | 140 | 139 | 138 | 135 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.