32.5m Head 612m3/h Single Stage Double Suction Split Case Water Pump
32.5m Head 612m3/H Single Stage Double Suction Split Case Water Pump 250S39
Parameters of 250S39
| Flow Capacity | 300-600 m3/h | Delivery Head | 20-40 m |
| Inlet/Outlet Dia. | 250/200 mm | Working Pressure | ≤ 0.4 MPa |
| Liquid Temperature | 0 - 80 ℃ | Driven By | Electric Motor / Diesel Engine |
| Seal Type | Mechanical seal / Gland packing | Liquid | Clean water or similar |
| Material of Construction | Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.s2205 | ||
| Model | Flow Rate |
Head (m) |
Speed rpm |
Power N(kW) |
Eff. (%) |
NPSHr (m) |
Inlet/Outlet Dia. (mm) |
Weight (kg) | ||
| m3/h | L/S | Shaft | Motor | |||||||
| 250S39 |
360 485 612 |
100 134.7 170 |
42.5 39 32.5 |
1450 |
54.8 62.1 68.6 |
75 |
76 83 79 |
3.2 | 250/200 | 620 |
| 250S39A |
324 468 576 |
90 130 160 |
35.5 30.5 25 |
1450 |
42.3 49.2 50.9 |
55 |
74 79 77 |
3.2 | 250/220 | 620 |
A horizontal split case pump is a unique type of centrifugal pump whose casing is divided into two distinct chambers, which is different from inline or end suction pumps that are assembled with the suction nozzle, discharge nozzle, and casing in one chamber.
Horizontal split case centrifugal pumps are designed with the suction and discharge nozzles in the bottom half of the casing, side by side, while the impeller shaft is positioned between two bearings, one on each side.
This rugged but simple design is particularly suitable for higher flow applications as it reduces thrust loads and allows for operation over a broad range of capacities. With proper application, HSC pumps offer minimal power consumption, low maintenance costs, and extended service life.
The casing can be split vertically or horizontally, relative to the impeller, which gives you either a vertical split case or a horizontal split case pump, respectively. Some manufacturers also offer custom configurations to optimize the pump for specific applications.
Main Parts Configuration
To meet the demands of multiple applications, which requires that pumps or parts are constructed in a specified material, the Sanchang split case pumps are available in a wide range of materials:
• Cast iron
• Ductile cast iron
• Bronze
• Nickel aluminum bronze
• Stainless steel
• (Super) duplex stainless steel
• Other materials on request
Here followed our recommendation of main configuration:
| Parts Name | Clean Water | Sewage | Hot Water | Corrosive Liquid | Oil Liquid |
| Pump Body | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Shaft | Cast Iron | S.S420 | S.S420/42CrMo | S.S630 | S.S420/40Cr |
| Shaft Sleeve | Carbon Steel | S.S420 | S.S304 | S.S316/S.S630/S.S2205 | S.S304/S.S316 |
| Impeller | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Wearing Ring | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Bearing | China Make/NSK/SKF/Customized | ||||
| Seals | Mechanical Seals/Gland Packing Seals | ||||
Applications
General residential & industrial water supply & transferring;
Agricultural irrigation & drainage, Flood discharge & Emergency drainage;
Civil water treatment, Waterworks, Sea water desalination;
Air-conditioning, Fire-fighting facilities, High building water supply;
Oil & Gas & Chemical processing, Abrasive liquids transferring;
Power plant water circulation, Cooling tower & Hot water transferring
Mining, Boiler feeding, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.