X20PS9400 B&R 24VDC Supply Module For Bus Controller X2X Link Power Supply And I/O

Price Negotiable

Price: USD

MOQ: 1EA

Delivery Time: 3-5 DAYS

Brand: B&R

Product Description

X20PS9400 B&R 24VDC Supply Module For Bus Controller, X2X Link Power Supply And I/O

MATERIAL NUMBER:

X20PS9400

DESCRIPTION:

Supply for the bus controller, X2X Link and internal I/O supply
Feed and bus controller / X2X Link supply electrically isolated
Redundancy of bus controller / X2X Link supply possible by operating multiple supply modules simultaneously
Service interface (RS232)

The supply module is used together with an X20 bus controller. It is equipped with a feed for the bus controller, the X2X Link and the internal I/O supply.

Short description

Power supply module	24 VDC supply module for bus controller, X2X Link power supply and I/O
Interfaces	1x RS232 service interface

General information

B&R ID code	0x1F8C
Status indicators	Overload, operating status, module status, RS232
Diagnostics
Module run/error	Yes, using LED status indicator and software
RS232 data transfer	Yes, using LED status indicator
Overload	Yes, using LED status indicator and software
Power consumption for X2X Link power supply	1.42 W
Power consumption
Internal I/O	0.6 W
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B(0 - 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck)
LR	ENV1
KR	Yes
ABS	Yes
EAC	Yes
KC	Yes

Bus controller / X2X Link power supply input

Input voltage	24 VDC -15% / +20%
Input current	Max. 0.7 A
Fuse	Integrated, cannot be replaced
Reverse polarity protection	Yes

Bus controller / X2X Link power supply output

Nominal output power	7 W
Parallel connection	Yes
Redundant operation	Yes
Overload characteristics	Short-circuit proof, temporary overload

Input I/O power supply

Input voltage	24 VDC -15% / +20%
Fuse	Required line fuse: Max. 10 A, slow-blow
Reverse polarity protection	No

Output I/O power supply

Nominal output voltage	24 VDC
Behavior on short circuit	Required line fuse
Permissible contact load	10 A

Interfaces

Service interface
Signal	RS232
Variant	Connection made using 12-pin terminal block X20TB12
Max. transfer rate	115.2 kbit/s

Electrical properties

Electrical isolation	BC/X2X Link supply isolated from BC/X2X Link power supply I/O supply not isolated from I/O power supply, and RS232 not isolated from bus

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Derating".
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing