MS600-VOC Pump Type Portable Voc Gas Detector Multifunctional Alarm
MS600-VOC Portable Multiple Gas Detector
MS600 Series Portable composite gas detector can be used in mobile rapid and accurate detection of a variety of gas concentrations and measurement of environmental temperature and humidity.
Real-time detection or timing detection is supported; when no detection will be done, it is possible to shut down the pump so as to extend the startup time.
Multiple alarm modes, and multi-directional and three-dimensional indication alarm states. It includes sound & light alarms, vibration alarms, and display screen visual alarms.
Alarm types include concentration alarms, under-voltage alarms, and failure alarms.
Multiple alarm mode settings: low alarm, high alarm, interval alarm, and weighted average alarm.
Mis-operation recognition function: automatic recognition and prevention of the concentration calibration misoperation, which is possible to avoid the poor performance that may be caused by human factors.
|
Gases to be detected
|
VOC, and so on.Optional configuration: temperature and humidity measurements.
|
||||
|
Detection range
|
0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL, 20%, 50%, 100%Vol, can be selected; and other ranges can be customized.
|
||||
|
Detection principle
|
Electrochemical, catalytic combustion, infrared, thermal conductivity,
PID photoionization, and so on.
Depending on the type of gas, range, field environment and user demand.
|
||||
|
Allowable error
|
≤±1% F.S (other precision levels can be customized)
|
||||
|
Response time
|
T90≤20 seconds
|
Recovery time
|
≤30 seconds
|
||
|
Sample gas temperature
|
-40 ℃ ~ + 70 ℃, and the optional configuration of high-temperature sampling and cooling filter handle will be possible to detect the smoke gas at the temperature of 1300 ℃.
|
||||
|
Power supply
|
3.6VDC, 6000mA high capacity rechargeable polymer battery
|
||||
|
Display mode
|
2.5-inch high-definition color screen
|
||||
|
Detection mode
|
Built-in pump-suction type measurement, and flow rate at 500 ml / min. Calibration flow rate should be greater than 500 ml/min,
the three-way pipe should be connected, so as to ensure that the excessive gas will be discharged from the bypass |
||||
|
Communication interface
|
USB (charging and communication), optional: RS232, infrared communication, automatic recognition
|
||||
|
Data storage
|
Standard configuration is the data storage capacity for 100, 000 entries; SD card storage function is optional configuration
|
||||
|
Protection level
|
IP67
|
||||
|
Explosion-proof mark
|
Exia II CT6
|
||||
|
Exterior dimensions
|
180×78×33mm (L×W×H)
|
||||
|
Weight
|
350g
|
||||
|
Standard accessories
|
Manual, qualification certificate, warranty card, USB charger (including the data cable), high-grade aluminum instrument case, belt clip, humidity dust filter
|
||||
The detector is widely used in the petroleum, chemical industry, environmental protection, metallurgy, refining, biochemical medicine, agriculture, and explosion prevention.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.