MS600 Series Portable Composite Compound Gas Monitor Detector For Confined Space
MS600-VOC Portable Multiple Gas Detector
MS600 Series Portable composite gas detector can be used in mobile rapid and accurate detection of a variety of gas concentrations and measurement of environmental temperature and humidity.
*Built-in humidity dust filter, preliminary treatment of the detection gas, so as to protect the equipment.
*Multiple alarm modes, and multi-directional and three-dimensional indication alarm states.
Multiple alarm mode settings: low alarm, high alarm, interval alarm, and weighted average alarm.
*Zero-point automatic tracking; long-term use will not be affected by the zero drift.
*Multi-level calibration for target points, can ensure the linearity and accuracy of the measurements.
*Log recording Record the calibration logs, repair logs, failure history, failure countermeasure solutions, sensor service life due reminder, and function of reminder for the time of the next concentration calibration.
*Data recovery function.
*Detection principles include electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization, and so on. Depending on the type of gas, range, field environment, and user demand.
*Mis-operation recognition function: automatic recognition and prevention of the concentration calibration misoperation, which is possible to avoid the poor performance that may be caused by human factors.
|
Gases to be detected
|
VOC and so on.Optional configuration: temperature and humidity measurements.
|
||||
|
Detection range
|
0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL, 20%, 50%, 100%Vol, can be selected; and other ranges can be customized.
|
||||
|
Allowable error
|
≤±1% F.S (other precision levels can be customized)
|
||||
|
Response time
|
T90≤20 seconds
|
Recovery time
|
≤30 seconds
|
||
|
Sample gas temperature
|
-40 ℃ ~ + 70 ℃, and the optional configuration of high-temperature sampling and cooling filter handle will be possible to detect the smoke gas at the temperature of 1300 ℃.
|
||||
|
Power supply
|
3.6VDC, 6000mA high capacity rechargeable polymer battery
|
||||
|
Display mode
|
2.5-inch high-definition color screen
|
||||
|
Detection mode
|
Built-in pump-suction type measurement, and flow rate at 500 ml / min. Calibration flow rate should be greater than 500 ml/min,
the three-way pipe should be connected, so as to ensure that the excessive gas will be discharged from the bypass |
||||
|
Communication interface
|
USB (charging and communication), optional: RS232, infrared communication, automatic recognition
|
||||
|
Data storage
|
Standard configuration is the data storage capacity for 100, 000 entries; SD card storage function is optional configuration
|
||||
|
Protection level
|
IP67
|
||||
|
Explosion-proof mark
|
Exia II CT6
|
||||
|
Exterior dimensions
|
180×78×33mm (L×W×H)
|
||||
|
Weight
|
350g
|
||||
|
Standard accessories
|
Manual, qualification certificate, warranty card, USB charger (including the data cable), high-grade aluminum instrument case, belt clip, humidity dust filter
|
||||
The detector is widely used in the petroleum, chemical industry, environmental protection, metallurgy, refining, biochemical medicine, agriculture, and explosion prevention.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.