220V Fixed Gas Detector Bypass Measurement Biogas Air Natural Gas Ultrasonic Flow Meter
Ultrasonic Flow meter
Ultrasonic Gas Flowmeter BF-3000B is based on bypass measurement method, which can measure the flow rate of biogas, natural gas, air and other gases. In the bypass type flow meter, flow in the main line is inferred by measuring the flow in a small bypass line, it can effectively solve the problems such as moisture and improve the measurement accuracy.
• Ultrasonic technology, high precision, long lifetime.
• Combination of the pressure, the flow measurement of large pipeline available.
• No effect if installation and maintenance when the pipeline is working.
• Low power consumption. 5 years Lifespan.
• All-in-one detecting design, measure flow velocity, pressure, temperature and methane concentration directly.
| General Parameter | |||||||||
| Applicable pipeline | DN32 | DN50 | DN80 | DN100 | DN125 | DN150 | DN200 | DN250 | DN300 |
|
Flow range(m3/h) Turn down ratio:200:1 |
3-65 | 8-160 | 12-240 | 20-400 | 30-600 | 40-800 | 80-1600 | 120-2400 | 160-3200 |
| Accuracy range | Class 1.5 | ||||||||
| CH4 composition | Range 30-100%VOL, Accuracy5%FS | ||||||||
| Power supply | External power supply: Safety Barrier Ui=5V,Li=100mA(main power supply) | ||||||||
| Internal battery:3.6V LS26500(backup power supply) | |||||||||
| Communication | RS-485 | ||||||||
| Explosion levels | ExibIIAT4 Gb | ||||||||
| Protection class | IP65 | ||||||||
| Working Environment | |||||||||
| Work temperature | -10~40℃ | ||||||||
| Humidity | <99% | ||||||||
| Working pressure | 0-200kPa | ||||||||
• Upgraded Bio-methane Gas
• Biogas Engine/CHP
• Anaerobic Digester
• Biogas Flare
Q: When do you reply to messages?
A: We will reply you for your inquiry in 24 hours.
Q: When do you send the products? And how do you send it ?
A: For the small order, we will send out the goods with 5 days,If have stock ,we will send immediately.
We send them by ups, fedex, tnt or dhl. For big order, normal is 20 days will finish.
Q:Do you accept OEM or revised logo, color, model,size?
A:Yes, we accept OEM for the qualify buyer. We can make the products according to customer personal requirement.
Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before ,shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you.
Q: How about your after-sale service?
A: After sending, we will track the products for you , until you get the products.
When you got the goods, test them, and give me a feedback.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.