The solder joint diameter is only 0.1-3.0mm, with high precision and precision;
The YAG laser has a wavelength of 1064nm and is less harmful to human skin than other lasers
Small heating range, to ensure that the workpiece is not deformation, no foaming
It makes up for the shortcomings of traditional argon arc welding and cold welding in repairing fine surface. Low oxidation effect, workpiece color change freely;
Welding operations can be performed in small Spaces or deep space without damage to the surrounding walls. There are no deformations in the mold and no dents around the weld pool.
Edges will not burn when repairing details.
Argon protection, to ensure that the repair parts and the substrate does not burn, oxidation.
Joystick control, moving workpiece, assembly, curve;
Microscope monitoring operation to ensure good vision of fine parts;
Imported welding wire, with a variety of imported mold materials, can achieve polishing and modeling.
In material, manpower, time and other aspects can greatly save the processing cost.

 

 

Product parameters:
 

Model	ML-WY-M02
Average laser power	200W
Max laser power	200W
Max energy of single pulse	75J
Laser wavelength	1064nm
Pulse width	0-20ms
Laser welding frequency	0.5 -100HZ
Spot size range	0.2-2mm
Welding wire	0.1-0.8mm
Power Supply	220VAC ± 10% / 50-60HZ
Power Consumption	6000w
Water pressure protection	≤ 0.025MPa
Cooling water temperature	≤ 35 degrees
Temperature protection	40 degrees
Cooling water flow	10L/min
Dimensional	1400mm x 1400mm x 1500mm
Weight	340 kg
Cooling Way	Water cooling
Laser Type	Pulse

 

 

 

Repair cracks, collapsed horn, touched edge and damaged sealing side, welding on horniness material (~HRC60). This machine’s arm could be move up and down, front and backwards, left and right side.