Clear Smooth PP Virus Sampling Tube PH 7.0-8.5 150mm Swab

Disposable Virus Sampling Tube

Structure Composition

This product consists of a swab and a tube containing a preservation solution. Non-sterile. The material of the sampling pipe body is PP, the material of the cap is PE, the material of the swab rod is ABS, and the material of the swab head is nylon wool

Sampling Tube

• The sampling tube body is transparent, the surface is smooth and clean, and the sticker is clear and complete.
• The tube body has no stains, no obvious scratches, cracks, uniform thickness of the tube wall, no obvious bending and deformation; The cap matches well with the tube body, and the screw is close, without the phenomenon of crooked cap

Preservation Solution

• Liquid should be odorless, tasteless, no visible particles or impurities, no turbidity, foam or bubbles in the process of transportation and use is a normal phenomenon
• The standard pH range is between 7.0 and 8.5
• The storage capacity is:1ml,1.5ml,2ml,2.5ml,3ml,3.5ml,4ml,5ml,6ml,7ml,8ml,9ml,10ml,12ml,15ml,20ml,25ml, Tolerance ±10%

Sampling Swab

Intended Use

Suitable for collection, storage and transportation of nasal cavity and oropharynx samples

Applicable Departments

Fever Outpatient Department, Emergency Department, Laboratory Department, Infectious Control Department

Usage Method

• Before sampling, clean hands, tear off the outer package of sampling swab, remove the swab, and be careful not to touch the swab head.
• According to different sampling requirements, use a swab to sample the corresponding parts.
• Immediately after sampling, place the swab in the collection tube with preservation solution to avoid contact with other parts.
• Break the swab, discard the tail, tighten the cap and complete the sampling.
• After sampling, the virus sampling tube will be placed and stored, and transported to the testing department for testing within 1 week.

Matters Needing Attention

• Verify that the outer package of the product is in good condition. Check the storage tube to confirm that there is no leakage.
• This product is for one-time use, no second use is allowed.
• The sampling process should be considered as a potential risk of infection, and the operation and handling should comply with the relevant regulations.
• After use, the product should be disposed of according to the relevant regulations of medical waste.

Important

• Ensure that the top of the sampling swab does not touch any surface prior to sampling.
• At the risk of choking, caution should be exercised when sampling swabs are inserted into the mouth.
• After the collection of pathogenic bacteria samples, one-time sampling swabs should be completely inserted into the preservation solution to maximize the retention of pathogenic bacteria.
• After use, the storage tube and swab should be disposed of in accordance with the relevant medical waste treatment methods

Company profile