7mm 8mm 9mm concrete reinforcement welded wire mesh panel for road base

Concrete Reinforcement Welded Wire Mesh Description:

It is made from metal rods with 3 to 16 mm diameter. These metal rods are perpendicular bonded by spot welding. Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings.

Our reinforcing mesh wire is ribbed steel rod, which creates improves bonding to concrete, minimizes any concrete cracking that may occur as a result of concrete shrinkage.

Smooth steel reinforcing mesh also can be manufactured according customers special requirement.

Mesh Size and Wire Diameter of Concrete Reinforcement Welded Wire Mesh:

1. Mesh size: 4.80 m × 2.4 m, 3.6 m × 2 m, 2 m × 4 m, 6 m × 2.4 m. Full size mesh sheets are 6 m × 2.4 m with side lap wires to minimize the laps between sheets on large areas, another in a handy 2 m × 4 m sheet, perfect for smaller jobs like driveways or DIY.
2. Cross wire and long wire diameter (mm): 6.00, 6.75, 7.60, 8.00, 8.55, 9.50, 10.00.
3. Mesh opening: 100 mm × 100 mm, 200 mm × 200 mm.
4. Square mesh lap has to be overlapped tied by tie wire at least 225 mm.

Concrete Reinforcement Welded Wire Mesh Details Pictures:

Standards of Concrete Reinforcement Welded Wire Mesh:

British Standard BS4483:1998 - Welded mesh used for reinforcement
Australian Standard AS/NZ/4671 - Cold drawn wire rods used for reinforcement
American Standard ASTM 185:1994 - Welded mesh made from deformed bars or wire rods used for reinforcement
Vietnamese Standard TCVN 267:2002 - Welded mesh used for reinforcement

Concrete Reinforcement Welded Wire Mesh Specifications:

Applications of concrete reinforcement welded wire mesh:

House beam ,house roof ,building board ,wall ,concrete road ,bridge ,airfield pavement ,highway ,water dam, road base and constructions ,ect.

Pictures of product: