Concrete Hooked End Metal Glued Steel Fiber Resistance To Cracking Impact Fatigue

Concrete Glued Hooked End Metal Steel Fiber

Glued Steel Fiber Introduction

Steel fiber concrete flooring can provide superior resistance to minimize cracks in hardened concrete, as well as maximum resistance to withstand heavy loads, either dynamic or static. If you decide to use steel fiber concrete flooring, you can select to use a ‘joint-less floor’. Joint-less floors are floors that have minimal joints, providing spaces without joints as large as 40 or 50-meter span wide.
 

Steel fiber dosage will vary greatly upon the project intended use, and the types of mesh being replaced. Common dosages are in the range between 20-30kg/m3 to 40-50kg/m3 for joint-less floors

Typically the fibers are added at the batch plant, just after all concrete aggregates are being mixed. Some people would request to have the fiber added at the job site, but then the QA/QC should have more control on how much fiber is added. The steel fiber manufacturer can provide guidance on how to mix and the amount needed to obtain the desired results. Be aware that if you add too much fiber, it might show up at the surface when finishing the concrete so be cautious about the amounts being mixed.

Glued Steel Fiber Specs

Advance of End Hooked Glued Steel Fiber

• Improved flexural properties
• Reduced absorption of water, chemicals, etc.
• Can be used on fast track schedule
• Easier positioning of joints
• Reduced site labor for managing steel reinforcement
• Reduced project costs
• Increased impact and abrasion resistance
• Even distribution of fibers throughout the concrete

Technical and engineering support

• We support you at everytime
• Setting up your project specification
• Recommend the most appropriate fiber type to dosage rates to guarantee performance and comply with the specifications.

Package and Delivery: