High Strength 4m Magnesium Rods ASTM B90 AZ91D Magnesium Alloy Rod
High Purity And High Strength Magnesium Alloy Extruded Rod Model AZ91D
Product Description
High specific strength, elastic modulus, good heat dissipation and eliminate shock resistance to withstand the shock load capacity than aluminum,organic matter and alkali resistance and good corrosion. Mainly used in aviation, aerospace, transportation, chemical, rockets and other industrial sectors. In the utility magnesium is the lightest metal and the proportion of magnesium is about 2/3 of aluminum, iron 1/4. It is the lightest metal in practical metal, high strength, high rigidity.
Compared with conventional casting magnesium alloys, semi-continuous casting magnesium alloys are finer in the organization, more uniform on the ingredients, and more compact inside with higher strength and elongation.
Application: Applied to Magnesium Alloy plates, strips, tubes, rods, profiles, wires and the alloy ingots and slabs used for them.
Standard: ASTM B90/B90M
Processing Technology: Extrusion,Casting.
Features of magnesium alloy rod:
- Good ductility and corrosion resistance,
- High electrical and thermal conductivity,
- Good room temperature strength at room temperature
- Suitable for round, flat and square bars, pipes, plates and forgings
Size of magnesium alloy rod:
Type: AZ31B, ZK61M, AZ80A, AZ91D, M2M, ME20M, AZ40
Specification: Casting round bar billet(Φ3-160*3000)
Physical Properties:
Density: 1.8
Coefficient of thermal expansion: 26.8 x 10-6K-1
Specific heat: 1040 Jkg-1k-1
Thermal conductivity: 76.9Wm-1k-1
Electrical resistivity: 92nΩm
Modulus of elasticity: 45 x 109Pa
Poissons ratio: 0.35
Melting range: 566 - 632°C.
Product Name
Magnesium Alloy Rod
Hot Rolled Magnesium Alloy Rod
Cold Rolled Magnesium Alloy Rod
Large Diameter High Strength Rare Earth Magnesium Alloy Rod
High Performance Magnesium Alloy Rod
Specification & Chemical Composition
| Item | Magnesium Alloy Rod AZ91D | ||||
| Material | Magnesium Rod | ||||
| Thickness | as customer's required | ||||
| Width | as customer's required | ||||
| Length | as customer's required | ||||
| Size | customize | ||||
| Features of Magnesium Alloy Rod | 1.fast heat dissipation,light and good rigidity | ||||
| 2.Good corrosion resistance and dimensional stability | |||||
| 3.Good impact resistance and wear resistance | |||||
| 4.Good absorption of vibration energy performance | |||||
| 5.high thermal and conductive properties | |||||
| 6.non magnetic, good shielding and non-toxic characteristics | |||||
Specification
Diameter: 30mm - 800mm
Length is required of customer
Product specification are tailored to customer's requirements
Features of Megnesium Alloy
High specific strength, elastic modulus, good heat dissipation and eliminate shock resistance to withstand the shock load capacity than aluminum,organic matter and alkali resistance and good corrosion. Mainly used in aviation, aerospace, transportation, chemical, rockets and other industrial sectors. In the utility magnesium is the lightest metal and the proportion of magnesium is about 2/3 of aluminum, iron 1/4. It is the lightest metal in practical metal, high strength and high rigidity.
Chemical Composition:
| Grade | Chemical Composition, % | ||||||||
| Al | Zn | Mn | Zr | Si | Fe | Cu | Ni | Mg | |
| AZ31 | 2.4-3.6 | 0.15-1.5 | 0.15-0.40 | ≤0.10 | ≤0.05 | ≤0.05 | ≤0.005 | Balance | |
| AZ40 | 3.0-4.0 | 0.20-0.80 | 0.15-0.50 | ≤0.10 | ≤0.05 | ≤0.05 | ≤0.005 | Balance | |
| AZ61 | Balance | ||||||||
| AZ80 | 5.5-6.5 | 0.5-1.5 | 0.15-0.40 | ≤0.10 | ≤0.005 | ≤0.05 | ≤0.005 | Balance | |
| AZ91 | 8.5-9.5 | 0.45-0.90 | 0.07-0.40 | ≤0.08 | ≤0.004 | ≤0.025 | ≤0.001 | Balance | |
| ZK61 | ≤0.05 | 5.0-6.0 | ≤0.1 | 0.45-0.80 | ≤0.05 | 0.05 | ≤0.05 | ≤0.005 | Balance |
| M1A | 1.2-2.0 | 0.1 | 0.05 | 0.01 | Balance | ||||
Application
Carving, aerospace, concrete tools, 3C (cell phone / camera / computer), water heater, refrigerator, gas pipelines etc.
Our Services
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: 100% by T/T in advance & Western Union
4. OEM/ODM available
5. Free samples provided
6. Competitive price and high quality
Certificate
We have attained ISO9001 and SGS certificate, standardize and improve the enterprise quality management system
FAQ
1. Q: Are you a factory or trading company?
A: We are direct manufacturer located in Zhengzhou Henan province, and have our equipment as well as plant
2. Q: Are your products customized?
A: Yes, the products in the website are only the common type or the previous types, we can supply the new products according to your requirements or drawings
3. I do not know how to use your product ?
Do not worry ! We can supply technical guidance together with products
4. Q: How can I get some samples?
A: Several samples are freely offered for buidling the business long-term relationships and letting our customers believing the quality of our products
5. Q: How does your factory do regarding quality control?
A: We passed ISO 9001 and SGS certificate
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.