93% GB ASTM DNV Magnesium Alloy Sacrificial Anode Cathodic Protection
Standard GB/ASTM/DNV Magnesium Alloy Sacrificial Anode For Cathodic Protection
Product Description
The use of magnesium sacrificial anodes for cathodic protection is an effective method to prevent metal corrosion. Magnesium alloy sacrificial anodes have the following characteristics: good corrosion resistance, no external DC power supply, automatic operation after installation, no maintenance, and less floor space , The project cost is low, and there is no interference with the external environment. Magnesium sacrificial anodes are widely used in petroleum pipelines, natural gas, gas pipelines and storage tanks; ports, ships, subsea pipelines, drilling platforms; airports, parking lots, bridges, power plants, municipal construction, water treatment plants, petrochemical plants, smelters , Corrosion protection of gas stations, water heaters, heat exchangers, evaporators, boilers and other equipment.
The magnesium alloy sacrificial anode (abbreviation: magnesium anode) developed and produced by our company according to the national standard GB/T17731-2009 "Magnesium alloy sacrificial anode" is suitable for the cathodic protection of metal structures in soil, fresh water and other media. As an ideal sacrificial anode material, this product has the following characteristics:
- The specific gravity is small and the potential is relatively negative.
- The driving voltage to iron is high, and the current efficiency is low.
- Large power generation per unit mass and long service life.
|
Product Type:
|
Magnesium Anode
|
|
Material
|
Magnesium alloy AZ31 AZ61 AZ91
|
|
Differnet Kinds
|
Casting rod, Extruded rod, Rod with steel cap, Flexible anode rod
|
|
Chemical Composition
|
Al:2.5-3.5%, Zn:0.6-1.4%,Mn:0.2-1.0%,Fe:0.005%max,, Cu:0.01%max,Ni:0.001%max,Si:0.1%max, Other:0.3%max,Mg:Balance
|
|
Property
|
Open-circuit voltage: 1.5-1.55V
Close-circuit voltage:1.45-1.50V
Actual capacitance: 1.105A.h/g
Current efficiency: 50% min
|
|
Steel Cap
|
stainless steel, galvannized, in black, coppper etc.
|
|
Application
|
It mainly used in water heater,boiler,heat exchanger,water tank,etc.
It can softing water,de-dirt residual,ensure water sanitation,water scale inhibition,protect inner tank,extend service life,etc.
|
|
Feature
|
The extruded anode rod can be with or without steel core,can be with steel cap or only with screw;the size of cap/screw can be customilized by your specific requirements.
Mainly different kinds of steel cap and screw available.
|
Specification
Type: AZ31B, ZK61M, AZ80A, AZ91D, M2M, ME20M, AZ40
Specification: Casting round bar billet(Φ3-160*3000)
Remarks: According to the requirements of sawing and heat treatment
UK Standard ZK60 WE43 Magnesium Metal Plate Small Modulus Of Elasticity
Chemical Composition
According to the application requirements, produce high strength, heat resistant rare earth-Magnesium alloy extruded bars, tubes, wire rods, Welding wire and profiles set by national standard, ASTM, EN standard and autonomous development. The mechanical properties of the products are better than those set by various standards, and the products can be adjusted according to the concrete requirements of clients. The Magnesium products are used in different fields such as aerospace, rail transit, road traffic, pipeline transportation, textile machinery, 3C products, LED illumination etc.
High strength, heat resistant rare earth- magnesium alloy die castings set by national standard, ASTM, EN standard and autonomous development, such as steering wheel skeleton, the tank pan, power tools housing, electric wheel hub, 3C product shell and skeleton etc. The mechanical properties of the products are excellent and the microstructure of the products is homogeneous.
| Alloy Element | Type | Chemical Composition% | Other elements b | ||||||||||||
| Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Sub-total | total | ||
| MgAlZn | AZ31B | Balance | 2.5-3.5 | 0.6-1.4 | 0.1-0.2 | --- | --- | ≤0.08 | ≤0.003 | ≤0.04 | ≤0.01 | ≤0.001 | --- | ≤0.05 | ≤0.30 |
| AZ40M | Balance | 3.0-4.0 | 0.2-0.8 | 0.15-0.5 | --- | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.005 | ≤0.01 | ≤0.01 | ≤0.30 | |
| AZ80A | Balance | 7.8-9.2 | 0.2-0.8 | 0.12-0.5 | --- | --- | ≤0.10 | ≤0.005 | --- | ≤0.05 | ≤0.005 | --- | --- | ≤0.30 | |
| AZ91D | Balance | 8.5-9.5 | 0.45-0.9 | 0.17-0.4 | --- | --- | ≤0.08 | ≤0.004 | --- | ≤0.025 | ≤0.001 | 0.0005- | ≤0.01 | ≤0.30 | |
| 0.003 | |||||||||||||||
| MgMn | M2M | Balance | ≤0.20 | ≤0.30 | 1.3-2.5 | --- | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.007 | ≤0.01 | ≤0.01 | ≤0.20 |
| MgZnZr | ZK61M | Balance | ≤0.05 | 5.0-6.0 | ≤0.10 | --- | 0.3-0.9 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.005 | ≤0.01 | ≤0.01 | ≤0.30 |
| MgMnRe | ME20M | Balance | ≤0.20 | ≤0.30 | 1.32-2.2 | 0.15-0.35 | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.007 | ≤0.01 | ≤0.01 | ≤0.30 |
Aplication
1. Transportation
Seat frame, armrest, small table panel, pedal, in-built profiles, driving frame, sleeper frame work, dashboard frame work etc.
2. Electronics
Magnesium alloys have excellent thin wall casting performance. They wall thickness of magnesium alloy die castings can reach 0.6-1.0mm, and the die castings can remain certain strength, stiffness and impact resistance. These performances are very consistent with development demand of lightweight, thin short and small for laptop. Mobile phone, digital camera, that makes the application of magnesium alloy grow sustainably.
3. Aerospace industry
Engine shell, parts. Skin and cabin, frame, holder, wingtip, aileron, fuel tank, gearbox, airscrew, seat, undercarriage, all kinds of shell, siding, clapboard etc.
4. Military industry
Panzer tank vehicle, torpedo, guided missile, aircraft / spacecraft, military electronic equipment, military statellite.
5. Medical industry
Medical device and implant material.
Our Advantages
Corrosion protection
Protect water heater, water containers of steel structure
Protect the gas pipeline in-home service polarization high resistance electrolytes (soil and water in the steel structure)
FAQ
Q: Do you provide OEM/ODM service?
A: Yes, OEM/ODM is welcome, we have the professional R&D team.
They work for you all the time (design, tooling/mould, sample, mass production).
Q: How can I know your company further?
A: Please leave message in website with you email or phone number, the sales manager will send the catalogue to you by email or call you directly.
Also welcome to visit our company!
Q: How can I get the quotation, sample, mass production?
A: Please show us the sizes/drawing of the parts you need, our business director will show you detailed quotation with the lead time of sample and mass production.
Q: How do you control the quality?
A: The products are produced under ISO9001 & SGS certificate.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.