Grey ASTM Standard AZ91D Magnesium Etching Plate Polish Surface
High Strength ASTM Standard AZ91D Magnesium-Based Engraving Plate
Product Description
Semi-continuous casting products of high strength, heat resistant rare earth-magnesium alloy set by National Standard, ASTM, EN standard and autonomous development. Our company can produce aylindrical bars with Dia. 90-800mm and casting slabs with max working size of 1200*450mm. the grain size of part of the alloys can be controlled under 90um, and the quantity of magnesium ingots has reached or exceeded correlative standards. The products have been widely used in major industries such as forging, extrusion, rolling etc.Magnesium plate is with light weight, thermal conductivity, heat transfer and heat dissipation, high surface hardness, stripping easy.
In the paper packaging industry, etched magnesium plate is used as a gold foil version and embossing plate . Same size templates , relatively light weight magnesium board, transportation, installation , sticky boards are convenient. Heat capacity than the etched magnesium plates , good bronzing effect, bright gold , patterned fine and shiny.
| Alloy | Grade | chemical composition % | |||||
| Mg | Al | Zn | Mn | Ce | Zr | ||
| Mg | Mg99.95 | ≥99.95 | ≤0.01 | - | ≤0.004 | - | - |
| Mg99.50 | ≥99.5 | - | - | - | - | - | |
| Mg99.00 | ≥99.0 | - | - | - | - | - | |
| MgAlZn | Az31B | Bal. | 2.5-3.5 | 0.60-1.4 | 0.20-1.0 | - | - |
| AZ31S | Bal. | 2.4-3.6 | 0.50-1.5 | 0.15-0.40 | - | - | |
| AZ31T | Bal. | 2.4-3.6 | 0.50-1.5 | 0.05-0.04 | - | - | |
| AZ40M | Bal. | 3.0-4.0 | 0.20-0.80 | 0.15-0.50 | - | - | |
| Az41M | Bal. | 3.7-4.7 | 0.80-1.4 | 0.30-0.60 | - | - | |
| AZ61A | Bal. | 5.8-7.2 | 0.40-1.5 | 0.15-0.50 | - | - | |
| AZ80A | Bal. | 7.8-9.2 | 0.20-0.80 | 0.12-0.50 | - | - | |
| Az80M | Bal. | 7.8-9.2 | 0.20-0.80 | 0.15-0.50 | - | - | |
| AZ80S | Bal. | 7.8-9.2 | 0.20-0.80 | 0.12-0.40 | - | ||
| Az91D | Bal. | 8.5-9.5 | 0.45-0.90 | 0.17-0.40 | - | - | |
| MgMn | M1C | Bal. | ≤0.01 | - | 0.50-1.3 | - | - |
| M2M | Bal. | ≤0.20 | ≤0.30 | 1.3-2.5 | - | - | |
| M2S | Bal. | - | - | 1.2-2.0 | - | - | |
| MgZnZr | Zk61M | Bal. | ≤0.05 | 5.0-6.0 | ≤0.10 | - | 0.30-0.90 |
| Zk61S | Bal. | - | 4.8-6.2 | - | - | 0.45-0.80 | |
| MgMnRE | Me20M | Bal. | ≤0.020 | ≤0.30 | 1.3-2.2 | - | - |
| Grade | Condition | Diameter/mm | Tensile Strength Rm/MPa | Rp0.2/Mpa | Elongation A/% |
| AZ31B | H112 | ≤130 | 220 | 140 | 7.0 |
| AZ40M | H112 | ≤100 | 245 | - | 6.0 |
| 100-130 | 245 | - | 5.0 | ||
| Az41M | H112 | ≤130 | 250 | - | 5.0 |
| AZ61A | H112 | ≤130 | 260 | 160 | 6.0 |
| AZ61M | H112 | ≤130 | 265 | - | 8.0 |
Az80A |
H112 | ≤60 | 295 | 195 | 6.0 |
| 60-130 | 290 | 180 | 4.0 | ||
| T5 | ≤60 | 325 | 205 | 4.0 | |
| 60-130 | 310 | 205 | 2.0 | ||
ME20M |
H112 |
≤50 | 215 | - | 4.0 |
| 50-100 | 205 | - | 3.0 | ||
| 100-130 | 195 | - | 2.0 | ||
| ZK61M | T5 | ≤100 | 315 | 245 | 6.0 |
| 100-130 | 305 | 235 | 6.0 | ||
| Zk61S | T5 | ≤130 | 310 | 230 | 5.0 |
Why Choose Us
Product Introduction
Our product and technical advantages:
Professional & advanced magnesium alloy casting technology
Better elongation of magnesium alloy plate is much better
More uniform crystal size of magnesium alloy plate
Smaller size difference of magnesium alloy plate
The flatness of our magnesium alloy plate can reached 0.0001mm after special hot-pressing process
Customized magnesium alloy plate with thickness range from I - 200 mm
Advanced testing & inspection equipment
Premium after-sales service
|
Name
|
Length
(mm) |
Thickness Tolerance
(mm) |
Thickness Tolerance
(mm) |
Thickness Deviation
(mm) |
Width Deviation
(mm) |
Length Deviation
(mm) |
|
Etching Plates
|
500×1000
610×914 |
1.0-7.0
|
±0.03
|
±0.03
|
±1.0
|
±1.5
|
|
Name
|
Thickness(mm)
|
Width(mm)
|
Length(mm)
|
Weight(kg)
|
|
Engraving Plates
|
1.5-7.0
|
500-610
|
914-1000
|
1.35-7.0 |
Technical Data
Our product are widely used in transportation (automobiles, motorcycles, bicycles, rail transit, aviation); electronic products (computers, mobile phones, digital cameras, etc.); medical equipment (wheelchairs, crutches, rehabilitation fitness equipment, etc.) aerospace; textile High standards and diversified demands in the fields of printing machinery and automobiles.
|
Alloy and Temper |
Thickness(mm)
|
Yield Strength 0.2% Offset (MPa)
|
Tensile Strength
(MPa)
|
Elongation in 5.65√A (%)
|
|
AZ31B-O
|
0.5-1.5
|
125
|
221
|
10
|
|
1.5-6.3
|
105
|
221
|
9
|
|
|
6.3-75
|
105
|
221
|
8
|
|
|
AZ31B-H24
|
0.5-6.3
|
200
|
269
|
5
|
|
6.3-9.5
|
179
|
262
|
7
|
|
|
9.5-12.7
|
165
|
255
|
8
|
|
|
12.7-25
|
152
|
248
|
8
|
|
|
25-50
|
138
|
234
|
6
|
|
|
50-80
|
124
|
234
|
7
|
|
|
AZ31B-H26
|
6.3-10
|
186
|
269
|
6
|
|
10-12.5
|
179
|
262
|
6
|
|
|
12.5-20
|
172
|
255
|
5
|
|
|
20-25
|
159
|
255
|
5
|
|
|
25-40
|
152
|
241
|
5
|
|
|
40-50
|
148
|
241
|
5
|
Related Recommendation
FAQ
Q1: Can I order a sample quantity ?
A: Yes
Q2: Can I add my logo on the boxes/cartons?
A: Yes, OEM and ODM are available from us.
Q3: What are the benefits of being a distributor ?
A: Special discount Marketing protection.
Q4: How does your factory control the quality of your products?
A: 100% self-inspection before packing. Quality is the life of our factory, first, each raw materials, come to our factory, we will test, if qualified, we will process the manufacturing with this raw materials, if not, we will return it to our supplier, and after each manufacturing step, we will test it, and then all the manufacturing process finished, we will do the final test before the commodities left our factory.
Q5: Can we mix items in one 20FT container?
A: Yes
Q6: Can I have a visit to your factory before the order?
A: Sure, welcome your visit to our plant
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.