3D Scanning Reverse Engineering CNC Precision Machined Parts Tolerance 0.05mm

Cnc Precision Machined Parts Parts Drawing Modification 3D Scanning Reverse Engineering

Product Description

We XinBo Precision has been engaged producing and supplying all kinds of CNC Milling parts over 10 years. Our flagship products include Brackets, Covers, Housings, etc. Conforming to all customer’s prints and the tolerance standard: ISO2768m, ISO2768f. These product supports a variety of applications, including chemical equipment, automotive industry, consumer electronics, etc.

Except CNC machining, we also provide one stop solutions like heat treatment, finishing, assembly and inspection.

Since we have CMM, so we can do the parts with GD&T requirements, we also accept the parts with special finishing requirements, for example musk partial surface and anodize at the rest surface, or extrude and saw to get the work blank, then machining.

Machining Equipment

We have strategically acquired a robust fleet of precision equipment in order to enhance our ability to meet any customer request. Our professional operators and shop personnel have been trained and remain up-to-date on all mechanical processes.

FAQ

What’s is the tricky CNC parts:

1. Too large parts, it need large CNC machine to work on it, in CNC machining area, the number of large CNC machine is much lower than normal CNC parts.

2. Too long, too thin parts, the parts will have deformation or shaking in the machining process, it’s easily failed.

3. Hollowed parts with high GD&T requirements parts, especially when the parts wall thickness is small, it’s hard to keep the GD&T.

4. Two or more finish on one part, for example, only partial surface have to be anodized, the normal way is to anodize the whole part, then remove the surface by machining on the surface which can’t be in anodize, it will increase the machining time.

5. The parts with extremely high tolerance, for the extremely precision parts, the part’s stress relief has to be taken into consideration, if the stress is not took into consideration, its hard to meet the tolerance.

6. Big part with very low quantity, some times the mistake is unavoidable to make the first part, so we have to prepare more than 2 times of material, that will increase the cost, especially for the big part, their material cost is high.