High And Low Temperature Tensile Testing Machine 5kN Mechanical Performance Test
High And Low Temperature Tensile Testing Machine 5kN Mechanical Performance Test
Equipment Overview
This machine is controlled by a computer and is widely used in mechanical performance tests of non-metallic materials such as rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics, metal wires, metal foils, metal plates and metal rods. It can also be used with special fixtures. It is suitable for tensile, compression, peeling, shearing, tearing, and bending (folding) tests of various finished products. It can print multiple data, and can make graphic output comparisons according to different data, with high control precision and easy operation; it adopts modular design, and various accessories are complete in variety and flexible in matching.
Technical Parameters
| Test Force Range | 0–500kg |
| Unit Switch | Kg, N, Lb (freely switchable) |
| Load Resolution | 1/250,000 |
| Load Accuracy | ±0.5% |
| Displacement Switch | mm, cm, in |
| Force Measurement Display Accuracy | 0.001Kg |
| Displacement Measurement Display Accuracy | 0.001mm |
| Deformation measuring device | large deformation measuring device |
| Deformation measurement range | 0.2%—100%FS |
| Test Stroke | 800mm (including fixture) |
| Effective Test Width | 400mm |
| Speed Test Range | 0.05–500mm/min, stepless speed regulation |
| Drive System | Uses servo motor, Taiwan Hiwin ball screw, and TM2101 software |
| Safety Features | Overload emergency stop, upper and lower stroke limit devices, automatic stop function at breakpoints |
| Test Fixture | Customized fixture based on product |
| Working Power Supply | AC220V 50Hz |
| Working Power | 1.0KW |
| Total Weight | Approximately 600kg |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.