Electric Vehicle Testing Equipment

Complies with IEC 61851-23:2023 clause 11.6.102. PLC controlled with motor drive, adjustable fixture height 500-1200mm. Supports pull forces 160N-500N and torque 0.6-16.3Nm. Ideal for AC/DC EV charging station cable anchorage testing.

Automated AC plug test system for GB, EU, and UL standards. Performs continuity, insulation, hi-pot, and voltage drop tests in one run. Supports 16A to 32A three-phase loads. Includes QR code traceability, PLC control, and MES-ready software. Conforms to IEC 62196-1.

Designed for breaking capacity and normal operation tests on EV charging interfaces per IEC 62196-1. Features servo motor drive, 0-150mm adjustable stroke, 0-500N force monitoring, and programmable PLC control. Supports external load and solution dip testing for reliable durability validation.

Precision test gauges for IEC 62196-2 and IEC 62196-3 compliance. Hardened steel contacts with surface roughness under 0.8 μm and ±0.05 mm spacing tolerance. Available in 16A, 32A, and 63A configurations for single-phase and three-phase systems. Ideal for EV charging interface testing.

Large-scale rain simulation chamber for complete vehicle waterproof testing. Complies with QC/T 476-2007 and IEC 60529. Features 7m spray section, adjustable nozzles, high-pressure air drying, and water recycling. Durable steel frame with safety alarms. Ideal for OEMs and labs.

Professional rain testing equipment for electric vehicles and trucks, featuring adjustable rain intensity (7-12mm/min), stainless steel construction, and coverage for vehicles up to 13700×2600×4200mm. Tests waterproof performance, sealing integrity, and assembly quality with precise 150kPa nozzle pressure and 1-60 minute test cycles.

Professional electric vehicle rain proof testing equipment with 10x3.5x3.5m vehicle capacity and 150kPa injection pressure. Features stainless steel pipelines, PP material nozzles, and programmable rain duration up to 9999 hours. Ensures reliable waterproof sealing performance for automotive components and compliance with technical standards.

Professional DIN 75220 compliant solar simulation test chamber for electric vehicle component testing. Features 2500×2500×2500mm working dimensions, -30℃ to 85℃ temperature range, and 1050W/m² radiation intensity with ±0.01W/m² accuracy. Equipped with intelligent power supply, 98 light sources, and comprehensive safety protection systems for accurate automotive component aging simulation.

Professional outdoor rain testing room for buses, passenger cars, and road vehicles. Features adjustable rain intensity (7-12mm/min), 150kPa nozzle pressure, and compliance with QC/T 476-2007 standards. Tests vehicle sealing performance, door/window assembly, and installation correctness with reliable PLC control system.

Professional rain test chamber for commercial vehicles featuring multi-directional spray system, stainless steel 304 construction, and compliance with QC/T 476-2007 standards. Includes drying system with ≤75dB noise level and comprehensive electronic controls for reliable rainproof performance testing of buses and passenger cars.

Industrial-grade dust test chamber designed for electric vehicle components, featuring 2500×4500×3500mm internal dimensions, 3-ton sample capacity, and compliance with IEC standards. Equipped with PLC control, stainless steel construction, and comprehensive safety features for reliable environmental testing performance.

Professional EMC test chamber designed for automotive ESA and electric vehicle components. Features comprehensive EMI and EMS testing capabilities from 150kHz to 6GHz, compliant with UN ECE R10, ISO 11452, and CISPR standards. Includes 9.2x6.2x6.2m anechoic chamber with control and amplifier rooms for complete electromagnetic compatibility validation.

Comprehensive electrical safety testing system for electric vehicles featuring both slow and fast charging port verification. Tests include DC/AC withstand voltage up to 6000V, insulation resistance measurement to 10GΩ, and automatic potential equalization testing. Compliant with GT/18384.1-2015 standards with built-in automated switching for efficient testing workflows.

Professional automotive testing equipment compliant with ISO 16750-4 and VW80000 standards. Features 150℃ temperature range, 100kg basket load capacity, and programmable 0-100 test cycles. Designed for thermal shock simulation with ice water splashing to test component durability against mechanical cracking and seal failure. Includes 7-inch touch screen control and comprehensive safety systems.

Professional rain simulation test chamber designed for electric vehicle waterproof performance testing. Features adjustable rainfall intensity (5-12mm/min), stainless steel construction, programmable test sequences, and compatibility with vehicles up to 6750mm length. Meets QC/T 476-2007 standards with 2-ton lifting capacity and IP55 motor protection.

Professional automotive testing equipment featuring 9 adjustable angle positions (0-20°), programmable rain intensity (30-50mm/min), and Siemens PLC control system. Designed for sunroof waterproof testing according to GB/T30037-2013 and major automotive manufacturer standards. Includes precision servo motor control and multi-stage filtration system for reliable performance.

Professional automotive rain spray test chamber designed for QC/T476-2007 and QC/T271-2021 compliance testing. Features Mitsubishi PLC control, 12±1mm/min rain intensity, 150±10kPa water pressure, and accommodates vehicles up to 13700mm length. Ideal for evaluating rainproof sealing performance of electric vehicles and passenger cars with comprehensive water ingress testing capabilities.

This 2kN universal testing machine meets IEC 62196-3 and BS 1363-2 standards. Features high-precision servo drive, 0.01-500 mm/min speed range, and 800 mm stroke. Supports tensile, compression, peel, and bend tests on metals and non-metals. Includes custom fixtures and PC control software.

Compliant with IEC 62196-1 and UL 2251, this servo-driven tester validates make-and-break and normal operation endurance for AC/DC charging connectors. Features 3-axis adjustable fixtures, programmable cycles up to 999,999, and real-time force monitoring. Supports external load and multiple solution tanks for comprehensive reliability testing.

This electromagnetic vibration testing machine simulates real-world vibration and shock for reliability testing. It features a 1000kgf excitation force, 1-3000Hz frequency range, and 300kg payload. Complies with GB, GJB, MIL, IEC, and ASTM standards. Custom options available.