EVSE Testing Equipment

Professional IPX1-X2 waterproof testing system for EV charging piles compliant with IEC60529-2013 and ISO20653:2006 standards. Features digital water supply with 9 independent flow meters, anti-clogging technology, and Mitsubishi PLC control with touch screen interface. Includes 3000mm tilting rotary table with 1-ton capacity for comprehensive testing.

Professional IP waterproof testing system compliant with IEC60529-2013 standards for EV charging stations and outdoor enclosures. Features digital water supply with 10-100L/min flow range, electric swing angle sprinklers, and Mitsubishi PLC control. Provides comprehensive IPX3 to IPX6 waterproof rating detection with 1 ton load capacity and automated testing parameters.

PLC-controlled test system for EVSE cable anchorage strain relief per IEC 61851-23:2023. Applies tensile forces 160N-500N and torque up to 16.3N·m. Features adjustable fixture height, touch-screen HMI, and power-off memory. Ideal for EV charger compliance testing.

Professional EV charging pile static load test bench compliant with EN IEC 61851-1 standards. Features PLC control, servo motor drive, 0-10kN top load capacity, 0-1500N side load, and 8 degrees of freedom movement. Designed for mechanical strength testing of electric vehicle charging equipment with precision force application and adjustable parameters.

Professional IEC 61851-compliant EVSE mechanical strength impact test equipment featuring dual pendulum and vertical impact systems. Offers 5J standard impact force (10J, 20J, 50J optional), PLC control with 7-inch touch screen, and 360° safety protection. Ideal for testing electric vehicle charging equipment durability and impact resistance.

Precision test finger compliant with IEC 61032 for EV charging equipment safety testing. Features 180mm fingertip-to-baffle reach, 12mm diameter, and dual functionality for electric shock and enclosure protection verification. Essential for IEC 61851-1 and IP2 standard compliance in electric vehicle infrastructure.

Professional EVSE testing equipment compliant with IEC 61851-1 clause 16 standards. Features dual test stations, adjustable 10-60mm stroke, 5-60 cycles/min speed, and comprehensive weight sets. Includes multiple abrasion test fixtures for reliable marking durability assessment on plastic injection and silk screen surfaces.

Precision test finger compliant with IEC 61032 Test Probe D requirements for EV charging equipment safety verification. Features 100mm test wire length, Ф1mm diameter, and SФ35mm stop face. Essential for testing protection against hazardous part access in accordance with IEC 61851-1 and IEC 60529 standards.

Professional pendulum impact test device for electric vehicle charging interfaces compliant with EN IEC 61851-1 standards. Features 20J impact energy, 5kg impact mass, electric height adjustment (200-1200mm), and customizable energy options. Designed for mechanical strength testing of EV charging piles with precise impact control and IK code compliance.

Professional testing equipment compliant with UL 2594 standards for evaluating impact resistance of EV charging stations and electronic equipment enclosures. Features 50mm steel ball impact testing with 6.5J energy, dual operation modes (vertical drop and swing impact), electric lifting system, and remote control operation for comprehensive safety testing.

Professional EVSE testing equipment for tracking index analysis with advanced PLC control, 7-inch touch screen, and 0-600V adjustable testing voltage. Complies with IEC 61851-1 and IEC 60112 standards, featuring precise electrode pressure control and automatic timing for accurate insulation material testing.

Professional walk-in IPX9K high pressure high temperature water ingress test room for electric vehicle charging systems. Features 8000-10000KPa spray pressure, 90°C temperature range, 500kg sample capacity, and robotic spray system with S-shaped trajectory. Compliant with IEC 61851-22 Clause 8.4 requirements for comprehensive EVSE testing.

Professional EVSE cord cantilever tensile and rocking life test equipment featuring PLC control, dual test stations, and adjustable parameters. This custom testing solution evaluates electric vehicle supply equipment durability with precise swing angles (-90° to +90°), automated testing cycles (up to 999,999), and servo motor drive for reliable laboratory R&D applications.

Compliant with IEC 61851-23:2023 clause 11.6.102, this test system evaluates EVSE cable pull force and torque resistance. Features PLC control, adjustable fixture height 500-1200mm, and precision weight loading for 160N-500N pull and 0.6-16.3Nm torque. Ensures reliable, repeatable compliance testing for AC/DC charging stations.

Compliant with IEC 61851-1 clause 12.7, this 12.5kV impulse voltage tester verifies transient overvoltage withstand. Features 1.2/50µs waveform, adjustable peak 300V-12.5kV, dual polarity, and 5-99s interval. Ideal for EVSE and appliance testing with customizable cycles.

PLC-controlled test system for EV charging station cable anchorage per IEC 61851-23. Supports pull forces up to 500N and torque up to 16.3Nm. Features touch screen, motor drive, and customizable cycles. Ideal for compliance testing labs.

Compliant with IEC 61851-1 and IEC 61851-23, this 20kV impulse generator tests EVSE robustness against transient over-voltages. Features 1.2/50 µs waveform, adjustable peak voltage 300V–20kV, and positive/negative polarity. Ideal for R&D and quality assurance in electric vehicle charging infrastructure.

Compliant with IEC 61851-23:2023 clause 11.6.102, this test apparatus applies adjustable pull force up to 500N and torque up to 16.3Nm. Features motor-driven eccentric wheel, preset cycles up to 999999, adjustable fixture height 500-1200mm, and power-off memory. Ideal for AC/DC charging station cable anchorage testing.

PLC-controlled tester for IEC 61851-23 compliance. Applies 160-500N pull force and 0.6-16.3Nm torque via weight superposition. Adjustable fixture height 500-1200mm, preset cycles up to 999,999, and power-off memory. Ensures cable anchorage durability for AC/DC charging stations.

Compliant with IEC 61851-1 and IEC 61851-23, this 20kV impulse test generator verifies transient overvoltage withstand capability. Features 1.2/50µs waveform, adjustable polarity, and 10–99s interval. Ideal for EV charging equipment testing with customizable options.