Electric vehicle charging station Cable Anchorage Pull Force and Torque Test Apparatus

Complied Standards & Clauses

It is designed and manufactured according to IEC 61851-1:2017 clause 11.6.

Equipment Overview

The weight is used to apply tension, and the weight and the torque arm realize torque. The PLC is used to control the number of tensions and the torque test time. When the number of tests or the test time is reached, the equipment automatically stops. After the test, the maximum allowable displacement of the charging gun connector cable shall not exceed the standard requirement value.

Power supply: AC220V±10%/50-60Hz, 1KW; working temperature 0-40℃, humidity 30%-90%;

Dimensions: about W1600*D600*H1450mm; weight: about 180kg

Technical Parameters

Test content	Supply plug and/or vehicle plug cable of EV charging station tension test and torque test
Equipment structure schematic diagram	Refer Schematic
Torque application time	0-99H59M59S can be preset
Pull cycles	1-999999 cycles, can be preset, default is 100±1 cycles
Pull apply	Meet 160N, 200N, 240N, 250N, 500N specifications, realized by superposition of weights
Torque apply	Meet 0.6N·m, 0.7N·m, 1.4N·m, 2.7N·m, 5.4N·m, 11.0N·m, 16.3N·m specifications,realized by superposition of weights
Torque wheel	R100mm(Ф200mm) ±0.5mm
Tensile frequency	1 time/s, the actual pull time is detected by the electrical signal
Fixture	Universal clamp, one set
Drive mode	Electric
Power failure protection	With power-off data storage memory function
Control operation mode	PLC automatic control, touch screen operation
Weight matching selection table

Details

---