Electric Vehicle Salt Spray Cyclic Corrosion Test Chamber 8000x5000x3500mm with PLC Control and 5T Capacity
- GMW8738-2005 "Proving Ground Corrosion Road Test Specification"
- GM9540P-1997 "Accelerated Corrosion Test"
- GMW14872-2006 "Cyclic Corrosion Laboratory Test"
- GMW14872 "Cyclic Corrosion Laboratory Test"
- SAE J2334 "Laboratory Cyclic Corrosion Test"
This salt spray cyclic corrosion test chamber serves as essential equipment for evaluating product adaptability and reliability, with extensive applications throughout the automotive industry. The system effectively tests the corrosion resistance of electrophoretic coatings with varying film thicknesses, components, and structural configurations under accelerated salt spray conditions.
Ideal for salt spray corrosion testing of automotive components, electronic hardware, metal material protective layers, and industrial products. Specifically designed for automotive applications including:
- Vehicle body corrosion testing
- Chassis component evaluation
- Engine part corrosion analysis
Capable of performing multiple test protocols: neutral salt spray test, acetate salt spray test, and copper accelerated acetate salt spray test.
| Parameter | Specification |
|---|---|
| Control & Operation | PLC and touch screen intelligent control system (External computer operation optional) |
| Test Room Size | 8000 mm × 5000 mm × 3500 mm (depth × width × height) (Custom sizes available) |
| Door Type | Double door, 4000 mm × 2600 mm, stainless steel construction Double layer silicone rubber sealing with locking mechanism |
| Observation Window | 350 × 450 mm (width × height) Conductive film heating anti-fog glass |
| Sample Room Temperature | RT ~ 55°C |
| Saturation Barrel Temperature | 35°C ~ 70°C |
| Temperature Deviation | ±2°C (no load) |
| Temperature Fluctuation | ±0.5°C (no load) |
| Salt Spray Deposition | 1.0 ~ 2.0 ml/80cm²·h |
| Salt Spray Concentration | 5 ± 0.5% |
| Humidity Range | ≥95% RH |
| Spray Method | Pneumatic continuous and intermittent spray (adjustable) |
| Air Pressure | 0.2 - 0.4 MPa |
| Spray Pressure | 0.05 ~ 0.17 MPa/cm² |
| Center Angle | 110° ~ 120° |
| Test Time | 0 ~ 999 hours, minutes, seconds (presettable) |
| Bottom Loading Capacity | ≥5 tons |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.