Vertical 1.0 MPa sintered wire mesh filter self-cleaning irrigation treatment

 
Describe:

The multi-element filter has the characteristics of backwashing and filtering. The machine continuously filters for 24 hours without interruption. When the filter element is blocked, the power distribution system runs, and the backwash rotating arm intelligently rotates to backwash the filter elements one by one, reducing the cost of downtime. , Maintenance cost and labor cost, it is an advanced solution for water and aqueous liquid filtration.

Control mode:
Automatic control: timing and pressure difference, filter timer to set the filter time, the filter time is up, start to drain, the drain time is set by the drain timer. At the same time, the control system compares the filter pressure difference with the set pressure difference. When the filter pressure difference reaches the set value, the filter is cleaned and drained. The drain time is set by the drain timer, and the drain time is up. When it is time to stop cleaning, the filter is restored to its original state, ready for the next filtration process.

Manual control: Switch the automatic/manual selection on the operation panel to the manual position, and the filter layer is drained.

Advantage:
1. Fully automatic intelligent control
2. Small size, large flow, high precision
3. Intelligent online backflushing does not stop and flow continuously;
4. The body replaces the filter element, quick-plug design, easy to replace;
5. Multi-filter element structure; precision can be adjusted;
6. It can be installed vertically/horizontally, which significantly saves installation space
7. The filter element has an online recoil precision of 5 microns, which can be used repeatedly.