KES Textile Testing Equipment Qmax Heat Retention Measurement

Fabric Testing Equipment Qmax Heat Retention Measurement Tester

Product Instruction

Heat Keeping Tester is used to determine the thermal property of fabrics.
- Sample is put on a constant temperature heated plate, and vertical air flow is directly applied on the top surface of the sample.
- Measure the heat loss flow through sample, and calculate the heat keeping capacity.
- Wind Tunnel automatic up and down.
- Specimen transfer automatically, reduce the error caused by manual operation.
- Touchscreen operation.

Four Testing Modes:
- Dry Contact Method: Sample directly contacts the heated plate.
- Wet Contact Method: Sample directly contacts the wet filter paper which is put on the heated plate.
- Dry Space Method: Sample is placed over the heated plate with a constant distance space.
- Wet Space Method: Sample is place over the heated plate with a constant distance space and a wet filter paper is put on the heated plate.

Applications

Textile fabrics, Leather, Cosmetics, Automotive Interior, Medical Products, etc.

Standard

KES Methods

Product Specifications

- Heat Plate: 100cm2 Aluminum, 1mm thickness
- Guarded Ring:130x130mm Aluminum, 6mm thickness
- Polystyrene Foam Specimen Rack (for Direct Contact Tests)
  a) Inner Opening: 100mm x100mm, Square
  b) Outer Dimension: 230×230mm
  c) Thickness: 2mm
- Outer Frame for Specimen Rack
  a) Outer Dimension: 230×230mm
  b) Thickness: 6mm
- Spacer(for Dry or Wet Space Tests)
  a) Bakelite
     i. Outer Dimension: 230×230×6mm
     ii. Inner Opening: 204×204mm
  b) Polystyrene Foam
     i. Outer Dimension: 204×204×5mm
     ii. Inner Opening: 100×100mm
- Wind Tunnel
  a) Inner Diameter: 14.8cm
  b) Air Flow Speed:0 – 1.5m/s
- Touchscreen Control
- PC Software for Data Record and Report
- Power:230V,50/60Hz, 2.5A
- Dimension:600(L)×400(W)×500(H)mm
- Weight:Approx. 100kg

Order Information

RF4008HK  Heat Keeping Tester