Medical 99% High Purity Hematology Reagent For Mindray BC-5000 BC-5150 Analyzers

• Remove all the reagent aspiration tubes from the currently used reagent boxes or bottles.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water. Put the tubes into the LABNOVATION reagent boxes or bottles.
• Run at least 53 backgrounds. Check for the acceptable values. At first high background counts can be seen, that should lower to normal after a few runs.
• Run all three levels of a dedicated commercial control. Check for the acceptable values.
• Recalibrate the unit if necessary.

• Re-calibration is recommended when changing the origin of the reagents.
• It is not recommended using different brands of solutions together on one unit of analyzer.
• Do not ingest. Avoid contact with skin and eyes.
• Skin contact: Flush with plenty of water.
• Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
• This kit is for professionals and in vitro diagnostic use only.

Specification

KIT COMPOSITION

• One source for all brands of analyzer 
• Reagents for both 3-parts and 5-parts
• Ready-to-use final products and bulk OEM reagents
• ISQ13485:2003 and ISO9001:2008 certified
• CE marked, FDA cleared
• Well-established brand used by thousands of lab in 95 countries
• High quality, high performance and high fidelity of correlations with original brand.

Storage

• Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.
• The open vial life of the product is 30/60 days. Unused reagents should be discarded after 30 /60 days. Do not mix residual with a new carton.