Professional RTK 1 Test Cov-19 Saliva Antigen Test Kit High Specificity

Rapid Test Kit Cov-19 Antigen Saliva Rapid Test Kit High Specificity 1 Test Professional Antigen Saliva Rapid Test Kit

Intend Use

SARS-CoV-2 antigen saliva rapid test kit is intended for detection SARS-CoV-2 antigen in human saliva sample. The test kit is an qualitative detection rapid test kit for professional use. About the test result, the positive result can be used forearly triage and rapid management of suspected populations, further nucleic acid detection should be carried out for suspected population whose antigen test result is positive or negative.
Product Details

 
Product  Advantage 

• Easy to use in simple step,10-15 minutes out of results
• The clean background, the result is clear and easy to read
• No pre-processing required, simple operation, do not need any auxiliary equipment
• Transported and stored at room temperature

Material May Need But Not Provided

• Timer
• Personal protective equipment, such as protective gloves, medical mask, goggles
•  Appropriate biohazard waste container and disinfectants

Main Components

• Test Cassettes
• Saliva Collectors With Collection Tubes 
• Sample Extraction Buffer
• Tube stand
• Instruction Manual

Use Step

• Open the cap of the collection tube and istall saliva collector.
• Put the collection tube with saliva collector close to lips and let the saliva flow into the collection tube. Tje volum of saliva needs to be half of 0.5 scal mark(0.25).
• Screw the sample extraction buffer carefully.

• Add all sample extration buffer to the collection tube. Discard the saliva collector, tighten the cap onto the specimen collection tube.
• Shake the specimen collection tube at least three time vigorously to mix the saliva and the extraction buffer. Squeeze bottom of the collection tube ensure the saliva is thoroughly mixed.
• Add 3 full drops of the solution to the sample well(S). Read the result at 15 minutes. Do not interpret the result after 20 minutes.

 
Result Interpretation

• POSITIVE: Two (2) distinct colored lines appear. One line should be in the control region (C) and the other line should be in the test region (T).

• NEGATIVE: One (1) colored line appears in the control region(C). No apparent colored line appears in the test region (T). The negative result does not indicate the absence of analytes in the sample, it only indicates the level of tested analytes in the sample is less than the minimum detection limit.

• INVALID: No colored lines appear, or control line fails to appear, indicating that the operator error or reagent failure. Verify the test procedure and repeat the test with a new testing device.

Application

• Center for Disease Control and Prevention
• Primary Health Care Institution
• School
• Prison / Detention Center etc.

Virus Sources

Stroage And Expiry

Store as packaged in the sealed pouch at 2-30℃, avoid heat and sunshine, dry place, valid for 24 months. Do not freeze. Do not open the inner packaging until ready, it must be used within one hour if opened (Humidity≤60%, Temp: 20℃-30℃). Please use immediately when the humidity＞60%.

Certificate

Precaution

• For IN VITRO diagnostic use only.
• Do not use samples that have been placed for longer than one hour or contaminated.
• If the saliva is not well mixed in the sample extraction tube, false negative results may occur.
• Waste should be treated in accordance with infectious substances and should be discarded properly.
• Keep away from children. Any child under age 13 shouldn’t perform the test without parental guidance, or professional aid.
• The extraction reagent contains preservative agent which may be toxic if ingested. When disposed of through a sink, flush with a large volume of water.

FAQ

• MOQ

We have the MOQ limit, which is 10000 pieces.

• Shipment

Air Cargo, Ocean Cargo or by Express

• Payment

Business to Business  account

• Contact

Whatsapp, E-mail or Phone.

• Delivery Date

After order confirmed, we will arrange your order immediately,and offer you an estimated delivery date.

OEM Or ODM Accept

Yes, We accept OEM / ODM  order.