Iron AC100V - 240V Digital Readout Systems DRO Milling Machine Digital Display Meter

Description of Digital Readout Systems DRO

Digital Readout (DRO) Systems are used for indicating the position of the cutting tool relative to a workpiece. The positions are detected by encoders mounted on the axis. They feature a numeric display and keyboard. DRO systems are used with milling and boring machines, lathes and surface grinders.

Digital Readout Systems DRO Details:

Resolution switch function

Bolt hole patterns, centerline calculation

Preset set and zero reset , tool error compensation

Absolute /Incrmental ,Inch / Metric

Message Prompts, Memory back-up

85V-250V, Can be used Globally

Specification of Digital Readout Systems DRO

1. Supply Voltage range: AC 80V~260V; 50~60Hz,US Plug available
2. Power consumption: 15VA
3. Operating temperature: 0~45 degrees centigrade
4. Storage temperature: -30~70 degrees centigrade
5. Readout allowable input signal: TTL/RS422 square wave
6. Allowable input signal frequency: Less than 5MHz
7. Display resolution: 5µm/1µm/0.5µm/0.1µm
8. Min resolution of digital display angle : 0.0001/pulse

Product image /photos:

The rack in the picture is optioned, not standard product.