SINO 3 Axis LED Digital Readout System DRO SDS6-3VF for RS232-C Output connection

SDS6 digital readout is allowed to input the high frequency of A/B signals up to 5MHz. It employs the newest 16 bits SCM technology, can substitute all kinds of basic function of different kinds of machine. That’s an all-purpose DRO, the speed of measurement is faster, and the control system is easier and smoother. Each axis can supply 40 points of non-linear compensations to increase the accuracy. SDS6-3VF DRO equips the RS232-C output function for PC or other special systems' connection.

Strengthen Functions:

1. Enlarge the calculator function:

SDS6 can change the decimal digits to be three, four or five digits to improve the calculating precision.

2. Non-linear error compensation:

The system has maximum 40 sections non-linear error compensation to improve the machining precision.

3. The numbers of decimal digits can be chosen in inch mode:

4 / 5 decimal digits can be chosen in inch mode. 4 digits can satisfy long scale requirement, and 5 digits can satisfy high precisions display.

4. Communication:

RS232-C output connection

Specifications :

Supply Voltage range: AC 80V~260V; 50~60Hz,US Plug available

Power consumption: 15VA

Operating temperature: 0~45 degrees centigrade

Storage temperature: -30~70 degrees centigrade

Readout allowable input signal: TTL/RS422 square wave

Allowable input signal frequency: Less than 5MHz

Max resolution of digital display length: 0.5µm

Min resolution of digital display angle :0.0001/pulse

Product image /photos:

RS232-C Output Interface: 

Size:

The rack in the picture is optioned, not standard product.