A Common Two-Axis Digital Reading Display For Precision Metal Processing Is SDS2MS DRO​

Two axis SDS 2MS digital DRO and KA grating ruler, with the following characteristics:

1. Dual-axis DRO: This set enables you to monitor and control the movement of a machine tool along two axes simultaneously, like the X and Y axes in a milling machine. This allows for a clear evaluation of the equipment's operational status.
2. Magnetic scale encoder system: The KA linear scale encoder system leverages magnetic technology to produce accurate and dependable readings. The DRO display unit and the magnetic balance installed on the machine shaft promptly reflect the equipment's position, which are used to track the work status and provide real-time position feedback.
3. Wide voltage range: The SDS 2MS DRO kit performs optimally within a broad voltage range, specifically 100V to 240V AC. Its voltage regulation capability ensures compatibility with different power supply standards, enabling the equipment to function properly when the voltage is set appropriately.
4. User-friendly interface: The interface of the DRO display unit, usually consisting of buttons and a digital display screen, is easy to operate. You can switch between various measurement data using the function button, saving time in the process.

Capabilities possessed:

1. Radius/diameter conversion.
2. Millimeter/inch conversion.
3. Absolute/relative conversion.
4. Midpoint splitting function.
5. Simple "R" function.
6. Smooth "R" function.
7. Circumferential PCD hole positioning.
8. 200 groups of zero position memory.

Detailed parameters of DRO SDS2MS digital readout system:

1. The voltage range is AC 85V ~ 250V / 50Hz ~ 60Hz.
2. Power consumption: 15 watts (25 VA).
3. Align the number using A and two positions.
4. Display data information using a 7-segment display with signs (for two or three axes), demonstrating how to output with eight meters of words and symbols.
5. Net weight: 2.9 lbs. / 1.3 kg.
6. The input signal features an easy-to-use interface with a programmable controller, along with TTL and EIA-422 open collector output signals.
7. Allow an input signal frequency exceeding 100 kHz.
8. The connectable resolutions include 10 microns, 5 microns, 2 microns, 1 micron, and so on.

Product image /photos:

​

The rack in the picture is optioned, not standard product.