FPR500A 220V Customized Acceptable Single Phase Input Single Phase Output

Power class and general function

Single-phase 220v±15% 0.75-2.2kw
Three-phase 380V±15% 0.75-315kw

VFD Installation tips

Please pay attention to the following points when installing the FPR500 series frequency converter:

1)Environment temperature: The ambient temperature has a great influence on the converter life. And operating ambient temperature of the converter is not allowed to exceed the allowable temperature range (-10°C~50°C).

1) The installation space requirements are shown in Figure 3 - 1. It is necessary to ensure that the VFD has enough heat dissipation space. Please consider the heat dissipation of other components in the cabinet when reserving space

2)Frequency converter is mounted on the surface of the flame retardant object, there should be enough space around to dissipate heat.

3)Please install in places not prone to vibration, the vibration shall not be greater than 0.6g. Pay special attention to staying away from the punch and other equipment.

4)Avoid direct sunlight, humidity, water drop places.
5)Avoid places with corrosive, flammable, and explosive gas in the air.

6)Avoid places with oil, dirt, and metal dust.

7)FPR500 plastic products are built-in products, it needs to be installed and used in the final system. After installation, only the keyboard panel may be exposed on the final shell for operation. The final system shall provide the relevant fireproof, electrical protective, and mechanical protective enclosure, etc., and comply with local laws and regulations and relevant IEC standards.

Packaging details