12v100ah Energy Storage Lithium Battery 3.2V LEP 4s1p For UPS

12v100ah deep cycle battery for solar storage 3.2V LEP battery 4s1p for UPS

Description:

Lithium-Iron Phosphate, or LiFePO4 Deep-Cycle batteries, are another alternative to Lead-Acid or AGM Deep-Cycle batteries. Lithium Iron Phosphate(LiFePO4 Battery) can be used in most applications that use Lead Acid, GEL or AGM type batteries.

Specification:

Reasons for replacing lead- acid battery pack with lithium iron phosphate battery pack:

1. The relative size is half of the weight of the lead acid battery

2. Provide twice the running time

3. cycle life over 2000 times

4. It can reduce operating costs

5. Give users a high return on investment

Advantages:

Built in BMS / waterproof box AAA 3.2V LiFePO4

BMS stands for "Battery Management System"-the brain of our deep-cycle battery. Our BMS protects your battery from the most common causes of battery failure, such as temperature fluctuations or ground faults. The BMS regulates the amount of power taken from the battery and acts as a shutdown system to protect the battery (and you) from unsafe operating conditions.

Application scenario:

it can directly replace the current scenario of lead-acid battery / RV / Golf cart / Yacht / etc

FAQ:

Q1. Can MATRIX battery ship battery out of China?
Yes, we can ship to any country out of China, you can tell us your address to check.

Q2. How does MATRIX battery ship the LiFePo4 battery packs?
For sample order or small battery packs, we can ship by express through Fedex, UPS, TNT etc. If whole parcel over 100KG, can ship by air or by sea, sea shipping is more cheaper.

Q3. Can we put different LiFePO4 battery pack in parallel or series by ourself?

Yes. The battery can be put in parallel or series by customers. But there are few tips we need to pay attention:
1> Make sure the voltage of each battery are same before put inparallel. If they are not same, charge them to the same rate.
2> Don't not put discharged battery and undischarged battery in parallel. This may reduce the capacity of the whole battery pack.
3> Advise us the target capacity of the whole pack if you would like to put them in series. We will choose the suitable BMS for each battery.
4> If you are not professional in parallel and series batteries, please don't handle the battery by yourself.It may cause danger and hurt the cycle life of battery.